In LCPU, file register capacity depends on CPU. The number of file register points cannot be increased. (A file register

The LCPU connector terminals can be used as terminals for built-in I/O function. The setting of the built-in I/O functio

The MODE switch can set the following modes.- 0 to 4: Online mode- 5 to 9: Line test mode- A to E: Hardware test modeEac

In the FX1S/FX1N/FX2N series, only the expansion board for special adapter connection can be used together with the spec

The present value register of the high-speed counter is the 32-bit register. The applied instruction handling the 32-bit

The input signal forms are different. All the programmable controllers for the domestic market other than the FX3G/FX3U

For communications using MELSOFT connection, such as GX Developer, GX Works2, GOT1000, and MX Component, up to two perso

When the programmable controller is powered on after a memory cassette is installed, the memory cassette is automaticall

For the Connected/Disconnected Module Detection of FX5-CCLGN-MS, the network configuration of the subsequent stages can

You can. It is supported by GX Works3 Ver. 1.085P and later.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

661-670 of Total 1023

prev 67 / 103page next

How to increase file register capacity

In LCPU, file register capacity depends on CPU. The number of file register points cannot be increased. (A file register cannot be set on an SD memory card.)... More Details >>
- No：22766
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
How to use LCPU connector terminals

The LCPU connector terminals can be used as terminals for built-in I/O function. The setting of the built-in I/O function can be configured with the paramete... More Details >>
- No：22796
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
MODE switch setting for QJ61BT11N

The MODE switch can set the following modes.- 0 to 4: Online mode- 5 to 9: Line test mode- A to E: Hardware test modeEach mode in ascending order of set valu... More Details >>
- No：23025
- Release Date：2018/09/03 17:31
- Category： Network related products
Using an expansion board and a special adapter together

In the FX1S/FX1N/FX2N series, only the expansion board for special adapter connection can be used together with the special adapter. In the FX3G series (onl... More Details >>
- No：24906
- Release Date：2019/04/15 11:32
- Category： MELSEC-F Series , Main Unit , I/O Extension
Operation error of the instruction that handles the present value of a high-speed counter

The present value register of the high-speed counter is the 32-bit register. The applied instruction handling the 32-bit register must be the 32-bit instruct... More Details >>
- No：24907
- Release Date：2019/04/15 11:32
- Category： MELSEC-F Series , High-Speed Counting
Differences in the specifications between the programmable controllers used in Japan and overseas.

The input signal forms are different. All the programmable controllers for the domestic market other than the FX3G/FX3U series are the sink input. The progra... More Details >>
- No：24913
- Release Date：2019/04/17 11:39
- Category： MELSEC-F Series , Main Unit
Maximum number of personal computers that can be communicated with the FX3U-ENET-L simultaneously

For communications using MELSOFT connection, such as GX Developer, GX Works2, GOT1000, and MX Component, up to two personal computers can be used. In additi... More Details >>
- No：24920
- Release Date：2019/04/17 11:41
- Category： MELSEC-F Series , Network/Communication
Setting for installing a memory cassette

When the programmable controller is powered on after a memory cassette is installed, the memory cassette is automatically recognized. After the memory casset... More Details >>
- No：24974
- Release Date：2019/04/23 07:20
- Category： MELSEC-F Series , Main Unit
Regarding the Connected/Disconnected Module Detection button on FX5-CCLGN-MS

For the Connected/Disconnected Module Detection of FX5-CCLGN-MS, the network configuration of the subsequent stages can not be automatically detected unless ... More Details >>
- No：39274
- Release Date：2023/01/12 16:45
- Category： MELSEC iQ-F Series , Network/Communication
Regarding using inline ST in FBD/LD Programs

You can. It is supported by GX Works3 Ver. 1.085P and later. More Details >>
- No：39335
- Release Date：2023/02/14 09:10
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software

661-670 of Total 1023

Inquiries

page top