It can be added in conjunction with an expansion board. For details on how to connect, refer to the following manual. ME

This is possible with the Guidance flow function. On GX Works3, you can view the setting procedure for the function you

The FX5 CPU unit does not handle double-precision real numbers. Only single-precision real numbers can be handled.

The "Forced ON/OFF function for external input/output" that forces X/Y devices to turn on/off from GX Works3 is supporte

The following points are different for the iQ-F series. ・All output disabled flag (SM8034) When SM8034 is ON, the all ou

The FX5-2HC/ES must be connected to the eighth module from the power supply module (CPU Module, expansion power supply m

PDO mapping is configured from the CC-Link IE TSN configuration settings. ① Open the CC-Link IE TSN configuration sett

You can adjust by setting the constant scan in iQ-F series. Setting procedure: Navigation window > [Parameter] >

All input COM terminals send the same signal because all the terminals are internally connected. To turn on the input,

A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one a

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

671-680 of Total 1023

prev 68 / 103page next

Regarding connection of SD Memory Card module: FX5-SDCD

It can be added in conjunction with an expansion board. For details on how to connect, refer to the following manual. MELSEC iQ-F FX5S/FX5UJ/FX5U/FX5UC Use... More Details >>
- No：39337
- Release Date：2023/02/14 17:27
- Category： MELSEC iQ-F Series , Option , CPU Module
Regarding the procedure for functions set in GX Works3

This is possible with the Guidance flow function. On GX Works3, you can view the setting procedure for the function you want to use. *It is supported by GX ... More Details >>
- No：39341
- Release Date：2023/02/14 17:29
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding double-precision real numbers

The FX5 CPU unit does not handle double-precision real numbers. Only single-precision real numbers can be handled. More Details >>
- No：40033
- Release Date：2023/08/24 15:37
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding forced ON/OFF function for external input/output

The "Forced ON/OFF function for external input/output" that forces X/Y devices to turn on/off from GX Works3 is supported with the following firmware version... More Details >>
- No：44330
- Release Date：2024/03/20 12:56
- Category： MELSEC iQ-F Series , CPU Module
Regarding specifications of the forced ON/OFF function for external input/output

The following points are different for the iQ-F series. ・All output disabled flag (SM8034) When SM8034 is ON, the all output disabled flag is given priorit... More Details >>
- No：44331
- Release Date：2024/03/20 12:54
- Category： MELSEC iQ-F Series , CPU Module
Regarding FX5-2HC/ES restrictions

The FX5-2HC/ES must be connected to the eighth module from the power supply module (CPU Module, expansion power supply module, built-in power supply I/O Modu... More Details >>
- No：44339
- Release Date：2024/03/20 13:25
- Category： MELSEC iQ-F Series , High-Speed Counter
Regarding PDO Mapping Settings

PDO mapping is configured from the CC-Link IE TSN configuration settings. ① Open the CC-Link IE TSN configuration settings from the FX5-CCLGN-MS Basic Set... More Details >>
- No：44475
- Release Date：2024/07/02 19:07
- Category： MELSEC iQ-F Series , Network/Communication
Regarding scan time adjustment for replacing the FX3 Series

You can adjust by setting the constant scan in iQ-F series. Setting procedure: Navigation window > [Parameter] > [Module model name] > [CPU Paramet... More Details >>
- No：44866
- Release Date：2025/03/18 10:24
- Category： MELSEC iQ-F Series , CPU Module
Multiple input COM terminals

All input COM terminals send the same signal because all the terminals are internally connected. To turn on the input, the extension unit must be connected ... More Details >>
- No：22274
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , I/O Extension
Regarding the system configuration of FX5-CCL-MS with FX5 CPU module

A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one as an intelligent device station. More Details >>
- No：22318
- Release Date：2018/08/30 13:55
- Update：2023/07/03 11:50
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication

671-680 of Total 1023

Inquiries

page top