Speeds of access to file registers

If file registers are registered in the standard RAM and "R" is specified by an instruction, the processing time is the same as is the case with the internal... More Details >>

Cables connected to the Ethernet port on the universal model QCPU

If a direct connection is made, either type can be used.If making a connection via a hub, use a straight cable. More Details >>

Specifying steps in printing data displayed in the window in GX Works2

GX Works2 Version 1.45X or later supports a print range specifying capability.Set "Start Step" and "End Step" for "Specified Print Range" in the Print window. More Details >>

Necessity for MX Component when MX Sheet is used

Yes.You can also purchase MX Works, a set of MX Sheet and MX Component. More Details >>

Change timing of the status of A/D conversion module's I/O signals

(1)If the A/D conversion enable signal is kept ON, conversion processing is kept performed. Once conversion processing is successfully performed, A/D conve... More Details >>

Use of a commercial SD memory card in L series logging function

Yes. Recommended products are listed in the technical bulletin FA-A-0078.　 More Details >>

Precautions for use of SD memory card

Yes. Note that SD memory cards are formatted at the factory. If an SD memory card needs to be reformatted, format it using the CPU module. More Details >>

Retention of auto tuning setting value for temperature control module

Use the automatic backup setting. While "1: enabled" is set in the CH[] automatic backup setting after auto tuning of PID constants in the buffer memory (Un\... More Details >>

Maximum number of modules to be connected to L26CPU-(P)BT

Up to 40 modules. When the branch module and extension module are used, use L26CPU-(P)BT CPU modules whose first 5 digits of the serial number are "13072" or... More Details >>

Resolution provided for L60AD4

The maximum resolution for the user range setting does not change. More Details >>