Follow the procedure below.(1)Eliminate the error cause.(2) Store the error code to be cleared in SD50.(3)Turn OFF and O

To establish the USB communication with a CPU module, install a USB driver. The following describes the installation pro

The USB driver is not installed.The driver needs to be separately installed before the first connection to a CPU module.

You do not have to uninstall GX Works2 before installing GX Works3. You can install GX Works3 into your computer where G

If a circuit is being monitored or a monitor window such as the device batch monitor window is open, [Transfer Setup] on

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project and

When you connect the built-in USB port of the FX3 series to the personal computer for the first time, you need to instal

Launch GX Works3, select a profile and register it from Tools > Profile Management > Register.

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be

The error code "2400" is "FILE SET ERROR".It may be determined as the cause of the error that the file that has been spe

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

61-70 of Total 1023

prev 7 / 103page next

How to clear errors

Follow the procedure below.(1)Eliminate the error cause.(2) Store the error code to be cleared in SD50.(3)Turn OFF and ON SM50.(4) The error is cleared. More Details >>
- No：22613
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
How to establish the USB communication between GX Works3 and a CPU module

To establish the USB communication with a CPU module, install a USB driver. The following describes the installation procedure. When multiple MELSOFT appli... More Details >>
- No：22459
- Release Date：2018/09/03 17:28
- Update：2018/09/18 15:24
- Category： MELSEC iQ-R Series
GX Works2's USB driver installation procedure

The USB driver is not installed.The driver needs to be separately installed before the first connection to a CPU module. More Details >>
- No：22507
- Release Date：2018/09/03 17:28
- Category： MELSEC-Q Series
Uninstalling GX Works2 before the installation of GX Works3

You do not have to uninstall GX Works2 before installing GX Works3. You can install GX Works3 into your computer where GX Works2 has already been installed. More Details >>
- No：22464
- Release Date：2018/09/03 17:28
- Update：2018/09/18 16:20
- Category： MELSEC iQ-R Series
Unable to select [Transfer Setup]

If a circuit is being monitored or a monitor window such as the device batch monitor window is open, [Transfer Setup] on the menu is grayed out. Select [Wi... More Details >>
- No：22548
- Release Date：2018/09/03 17:28
- Update：2018/09/20 15:40
- Category： MELSEC-Q Series
Regarding a mismatch found in the monitoring function of GX Works3

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project and "Convert" only coverts the modified... More Details >>
- No：22293
- Release Date：2018/08/30 13:55
- Update：2023/02/13 15:31
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Communications using the built-in USB port of the FX3 series

When you connect the built-in USB port of the FX3 series to the personal computer for the first time, you need to install the USB driver into the personal co... More Details >>
- No：22273
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit , Network/Communication
Regarding registering profiles

Launch GX Works3, select a profile and register it from Tools > Profile Management > Register. More Details >>
- No：44360
- Release Date：2024/03/27 16:01
- Category： MELSEC iQ-F Series , Engineering Software
Supported versions of the FX3U/FX3UC series main units for the CC-Link parameter settings using GX Works2

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be checked with the last three digits of... More Details >>
- No：24918
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Main Unit
Error code "2400" in QCPU

The error code "2400" is "FILE SET ERROR".It may be determined as the cause of the error that the file that has been specified by a parameter does not exist.... More Details >>
- No：22703
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series

61-70 of Total 1023

Inquiries

page top