No, you do not have to set the network range assignment parameters for slave stations. By setting the network range assi

FCN connectors (40-pin connector) are shown below.- A6CON1 (soldering connector)- A6CON2 (crimp connector)- A6CON3 (pres

The fixed data is used for specific codes and character strings such as a command. Setting a device is not required.

A station number can be skipped by setting the station as a reserved station.

Data are received on a received data count basis. If there is no receive complete code and variable length data is recei

- Reserved station Reserved stations are not actually connected to the network (but will be connected in the future

The same function blocks can be created and used.

Checking "Device Memory" does not read file registers. Switch the Target Memory for "PLC Data" to "Standard RAM" and che

Use L series CPU modules whose first 5 digits of the serial number are "13072" or later.

When the protocol is set to TCP, KeepAlive check is performed. (Checking for a response to KeepAlive ACK message) An ali

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

701-710 of Total 1023

prev 71 / 103page next

Parameter setting of CC-Link IE Field Network

No, you do not have to set the network range assignment parameters for slave stations. By setting the network range assignment parameters for a master statio... More Details >>
- No：23066
- Release Date：2018/09/03 17:31
- Category： Network related products
Model name of the connector used for the FCN connector type CC-Link remote I/O module

FCN connectors (40-pin connector) are shown below.- A6CON1 (soldering connector)- A6CON2 (crimp connector)- A6CON3 (pressure-displacement connector)- A6CON4 ... More Details >>
- No：23056
- Release Date：2018/09/03 17:31
- Category： Network related products
Unit of receive data used by the QJ71C24N series pre-defined protocol support function

The fixed data is used for specific codes and character strings such as a command. Setting a device is not required. More Details >>
- No：23049
- Release Date：2018/09/03 17:31
- Category： Network related products
Station number settings for MELSECNET/H networks

A station number can be skipped by setting the station as a reserved station. More Details >>
- No：23045
- Release Date：2018/09/03 17:31
- Category： Network related products
Receiving data when no receive complete code is designated (QJ71C24N)

Data are received on a received data count basis. If there is no receive complete code and variable length data is received, the data is received at every no... More Details >>
- No：23038
- Release Date：2018/09/03 17:31
- Category： Network related products
Difference between CC-Link reserved stations and invalid stations

- Reserved station Reserved stations are not actually connected to the network (but will be connected in the future) but do not appear as data link error... More Details >>
- No：22993
- Release Date：2018/09/03 17:31
- Update：2018/09/25 17:37
- Category： Network related products
Function blocks of GX Developer and GX Works2

The same function blocks can be created and used. More Details >>
- No：22887
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Operation performed when file registers are read

Checking "Device Memory" does not read file registers. Switch the Target Memory for "PLC Data" to "Standard RAM" and check "File Register" in the Read from P... More Details >>
- No：22835
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Restriction on the use of CPU when branch module and extension module are used

Use L series CPU modules whose first 5 digits of the serial number are "13072" or later. More Details >>
- No：22800
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Alive check for built-in Ethernet port LCPU

When the protocol is set to TCP, KeepAlive check is performed. (Checking for a response to KeepAlive ACK message) An alive check message is sent five seconds... More Details >>
- No：22782
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series

701-710 of Total 1023

Inquiries

page top