GX Works2 does not support the ACPU modules.Use GX Developer for the ACPU modules.GX Developer is included on the CD-ROM

In the PLC parameter setting of GX Developer, delete the start "200" of the default high-speed timer and input "0". The

No, it is unnecessary. Terminating resistors are only required at both ends of the network.

The refresh device setting of the CC-Link parameter assigns any devices to the I/O numbers greater than those assigned t

If the OUT instruction using the device number of the latch target device exists in a sequence program, the latched data

An expansion board is required. (However, it is not required when connecting only the special high-speed I/O adapter.)

Up to 63 files can be handled simultaneously. In addition, up to 1000 files can be created by creating FIFO function fil

It can be used in the FX3G series main units with Ver. 1.10 or later.

When the power is turned on, the FX5-CCLGN-MS performs parameter check processing, and if an error occurs, the CPU modul

It cannot. Because there will be two CC-link IE field network Basic master stations in a network.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

711-720 of Total 1023

prev 72 / 103page next

GX Works2's compatibility with the ACPU modules

GX Works2 does not support the ACPU modules.Use GX Developer for the ACPU modules.GX Developer is included on the CD-ROM of GX Works2.For the installation pr... More Details >>
- No：22873
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Setting a high-speed timer and a low-speed timer

In the PLC parameter setting of GX Developer, delete the start "200" of the default high-speed timer and input "0". The message indicating that "There is a d... More Details >>
- No：22943
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Necessity of terminating resistors in CC-Link communication

No, it is unnecessary. Terminating resistors are only required at both ends of the network. More Details >>
- No：22966
- Release Date：2018/09/03 17:31
- Category： Network related products
How refresh devices for CC-Link remote inputs and outputs are assigned

The refresh device setting of the CC-Link parameter assigns any devices to the I/O numbers greater than those assigned to the modules on the same base unit. ... More Details >>
- No：22968
- Release Date：2018/09/03 17:31
- Category： Network related products
Data backup failure

If the OUT instruction using the device number of the latch target device exists in a sequence program, the latched data may be overwritten by execution of t... More Details >>
- No：24783
- Release Date：2019/02/27 16:16
- Category： MELSEC-F Series , Engineering Software , Main Unit
Connecting special adapters to FX3U series

Anexpansion board is required. (However, it is not required when connecting only the special high-speed I/O adapter.) More Details >>
- No：24934
- Release Date：2019/04/18 14:23
- Category： MELSEC-F Series , Main Unit , I/O Extension
Number of files that can be created inside a CF card in the FX3U-CF-ADP

Up to 63 files can be handled simultaneously. In addition, up to 1000 files can be created by creating FIFO function files. * The total capacity of the files... More Details >>
- No：24944
- Release Date：2019/04/18 14:26
- Category： MELSEC-F Series , Main Unit , I/O Extension , Accessories
Using the inverter communication instruction in FX3G series

It can be used in the FX3G series main units with Ver. 1.10 or later. More Details >>
- No：24961
- Release Date：2019/04/23 07:17
- Category： MELSEC-F Series , Main Unit , Network/Communication
Regarding error 2440H on CPU module when using FX5-CCLGN-MS

When the power is turned on, the FX5-CCLGN-MS performs parameter check processing, and if an error occurs, the CPU module is also notified of the error. Ther... More Details >>
- No：39282
- Release Date：2023/01/12 16:49
- Category： MELSEC iQ-F Series , Network/Communication
Regarding Simple CPU communication function connection between CC-Link IE Field Network Basic masters within 1 network

It cannot. Because there will be two CC-link IE field network Basic master stations in a network. More Details >>
- No：39346
- Release Date：2023/02/15 10:05
- Update：2024/04/25 10:10
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication

711-720 of Total 1023

Inquiries

page top