To receive simultaneous broadcast using UDP, set the parameters as follows. - Destination IP Address: FF.FF.FF.FFh - Des

The socket communication can be used simultaneously with the simple PLC communication function.

The following settings are required for the "Open Setting" for the number of connected external devices.- Protocol: "UDP

Input derating is the percentage of simultaneous ON points, one of the specifications applied when input modules are use

The QnUDE(H)CPU modules with serial numbers with upper 5 digits of "14112" or later indicate compatibility with the func

Assign data registers (D) to Latch (1) or Latch (2) in the "Device Setting" window ([PLC Parameter] -> "Device Settin

Connect with a straight cable using a hub. For more details, refer to the following manual. - FL-net (OPCN-2) Interface

The RS-232 cable should meet RS-232 standards and not exceed 15 m in length.The RS-422/485 cable should meet specificati

Select "Use Label" in the New Project window.

If comments and symbolic information are stored in the program memory, write them in the standard ROM.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

711-720 of Total 1023

prev 72 / 103page next

Simultaneous broadcast reception setting for built-in Ethernet port LCPU

To receive simultaneous broadcast using UDP, set the parameters as follows. - Destination IP Address: FF.FF.FF.FFh - Destination Port No.: Other than FFFFh (... More Details >>
- No：22772
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Simultaneous use of simple PLC communication function and socket communication

The socket communication can be used simultaneously with the simple PLC communication function. More Details >>
- No：22740
- Release Date：2018/09/03 17:29
- Category： MELSEC-L Series
LCPU built-in Ethernet port setting when using the simple PLC communication function

The following settings are required for the "Open Setting" for the number of connected external devices.- Protocol: "UDP"- Open System: "MELSOFT connection" More Details >>
- No：22739
- Release Date：2018/09/03 17:29
- Category： MELSEC-L Series
Input derating

Input derating is the percentage of simultaneous ON points, one of the specifications applied when input modules are used. When QX42 is used in a temperatur... More Details >>
- No：22692
- Release Date：2018/09/03 17:29
- Update：2018/10/03 16:23
- Category： MELSEC-Q Series
Accessing file registers from the built-in Ethernet port QCPU using A-compatible 1E frames

The QnUDE(H)CPU modules with serial numbers with upper 5 digits of "14112" or later indicate compatibility with the function. The accessible device range is ... More Details >>
- No：22645
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Setting of Q series registers whose data is held when a power failure occurs

Assign data registers (D) to Latch (1) or Latch (2) in the "Device Setting" window ([PLC Parameter] -> "Device Setting" window) to hold the data when a po... More Details >>
- No：22601
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Cable used for FL-net

Connect with a straight cable using a hub. For more details, refer to the following manual. - FL-net (OPCN-2) Interface Module User's Manual More Details >>
- No：22574
- Release Date：2018/09/03 17:29
- Update：2018/09/20 16:55
- Category： MELSEC-Q Series
Recommended cables for MODBUS(R) interface module QJ71MB91

The RS-232 cable should meet RS-232 standards and not exceed 15 m in length.The RS-422/485 cable should meet specifications described in the following manual... More Details >>
- No：22566
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Using Structured Text in GX Works2 simple projects

Select "Use Label" in the New Project window. More Details >>
- No：22562
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Corrective action when the program size exceeds the capacity

If comments and symbolic information are stored in the program memory, write them in the standard ROM. More Details >>
- No：22560
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series

711-720 of Total 1023

Inquiries

page top