The error code indicates a WDT (watchdog timer) error. It is determined as the cause that the MELSECNET/H driver cannot

The value depends on the type of cable in use. - Ver.1.10-compatible CC-Link dedicated cables: 110 ohm, 1/2W - CC-Link d

D128 to D1099 are the latched device area. D1100 to D7999 can be changed to latched (battery backed) type devices by ins

When multiple ADPRW instructions are simultaneously executed, communication by the ADPRW command that was executed earli

GX Works2 is programmable controller engineering software integrating programming and simulation of programmable control

Select [Tool] -> [Options] -> [Program Editor] -> "Ladder/SFC"-> "Comment" and change "Reference/Reflection

The bits 0 to F of the special register SD1282 (Open completion signal) correspond to the connection numbers 1 to 16. Wh

Select [View] -> [Cross reference window] from the menu in GX Developer to display the cross reference window.

Each special function unit/block has 8 occupied points, except for some special function devices. These 8 points do not

Ladder program, ST program ・It is supported from the first product. SFC program The following version supports Online pr

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

761-770 of Total 1023

prev 77 / 103page next

Remedies for WDT errors on a MELSECNET/H board

The error code indicates a WDT (watchdog timer) error. It is determined as the cause that the MELSECNET/H driver cannot work due to a computer or OS hang, or... More Details >>
- No：22969
- Release Date：2018/09/03 17:31
- Category： Network related products
Resistor value for CC-Link cables

The value depends on the type of cable in use. - Ver.1.10-compatible CC-Link dedicated cables: 110 ohm, 1/2W - CC-Link dedicated cables (Version 1.00): 110... More Details >>
- No：22983
- Release Date：2018/09/03 17:31
- Update：2018/10/03 14:42
- Category： Network related products
Latched (battery backed) area in the data register (D) of the FX3G/FX3GC series

D128 to D1099 are the latched device area. D1100 to D7999 can be changed to latched (battery backed) type devices by installing an optional battery and setti... More Details >>
- No：24901
- Release Date：2019/04/15 11:31
- Category： MELSEC-F Series , Main Unit
Regarding handling multiple executions of ADPRW Instructions

When multiple ADPRW instructions are simultaneously executed, communication by the ADPRW command that was executed earlier is completed and communication by ... More Details >>
- No：39354
- Release Date：2023/02/15 10:17
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Difference between GX Works2 and GX Works

GX Works2 is programmable controller engineering software integrating programming and simulation of programmable controller and setting monitor tool functio... More Details >>
- No：22505
- Release Date：2018/09/03 17:28
- Update：2018/09/20 13:16
- Category： MELSEC-Q Series
Inputting device comments in GX Works2

Select [Tool] -> [Options] -> [Program Editor] -> "Ladder/SFC"-> "Comment" and change "Reference/Reflection Target for Device Comment" from "Glob... More Details >>
- No：22559
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
SD1282 of LCPU with built-in Ethernet port

The bits 0 to F of the special register SD1282 (Open completion signal) correspond to the connection numbers 1 to 16. When the open processing is completed, ... More Details >>
- No：22751
- Release Date：2018/09/03 17:29
- Category： MELSEC-L Series
The cross reference window is not displayed.

Select [View]-> [Cross reference window] from the menu in GX Developer to display the cross reference window. More Details >>
- No：22951
- Release Date：2018/09/03 17:30
- Update：2018/09/25 11:54
- Category： Engineering Software
Number of occupied points of special function devices

Each special function unit/block has 8 occupied points, except for some special function devices. These 8 points do not occupy 8 points of the actual I/O n... More Details >>
- No：24873
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series , Main Unit
Regarding Online program Change for FX5 CPU module

Ladder program, ST program ・It is supported from the first product. SFC program The following version supports Online program Change. ・FX5U/FX5UC module ... More Details >>
- No：40018
- Release Date：2023/08/24 14:30
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software

761-770 of Total 1023

Inquiries

page top