MX Component Version 4 supports the L series CPU.

Local device comments can be read if the comment file in which the local device comments are stored is written to the CP

There are two modes of transient transmission, cyclic transmission and transient transmission, for the communication bet

The input signal forms are different. All the programmable controllers for the domestic market other than the FX3G/FX3U

Keep SM722 ON or correct the program so that any one of the ten numbers 0 to 9 is stored in each digit of the source dat

Set the PWM output-on-width and the PWM output cycle, and then execute a dedicated instruction "ICPWM instruction".

Up to 10 modules can be connected in the system as a whole except for the power supply module, CPU module, display unit,

The built-in I/O functions are standard functions of the L series CPU. Combining these functions flexibly achieves vario

The overall cable distance and station-to-station distance depend on the version and the transmission speed. Figure 1 sh

Connect terminating resistors to both ends of physical cables.A master station is not necessarily required to be connect

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

771-780 of Total 1023

prev 78 / 103page next

MX Component Version 4's compatibility with the L series CPU

MX Component Version 4 supports the L series CPU. More Details >>
- No：22867
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Local device comments

Local device comments can be read if the comment file in which the local device comments are stored is written to the CPU module. More Details >>
- No：22869
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Communication between a CC-Link master station and local stations

There are two modes of transient transmission, cyclic transmission and transient transmission, for the communication between a master station and a local sta... More Details >>
- No：23006
- Release Date：2018/09/03 17:31
- Update：2018/09/26 13:53
- Category： Network related products
Differences in the specifications between the programmable controllers used in Japan and overseas.

The input signal forms are different. All the programmable controllers for the domestic market other than the FX3G/FX3U series are the sink input. The progra... More Details >>
- No：24913
- Release Date：2019/04/17 11:39
- Category： MELSEC-F Series , Main Unit
Operation error at the execution of a BIN instruction

Keep SM722 ON or correct the program so that any one of the ten numbers 0 to 9 is stored in each digit of the source data.An operation error occurs when data... More Details >>
- No：22635
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
How to use PWM output of LCPU built-in I/O

Set the PWM output-on-width and the PWM output cycle, and then execute a dedicated instruction "ICPWM instruction". More Details >>
- No：22757
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Maximum number of connectable modules to LCPU when it is not extended

Up to 10 modules can be connected in the system as a whole except for the power supply module, CPU module, display unit, RS232C adapter, and END cover. Some ... More Details >>
- No：22775
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
LCPU built-in I/O function

The built-in I/O functions are standard functions of the L series CPU. Combining these functions flexibly achieves various controls with lower cost, eliminat... More Details >>
- No：22806
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Overall cable distance and station-to-station distance in CC-Link networks

The overall cable distance and station-to-station distance depend on the version and the transmission speed. Figure 1 shows the case with Ver.1.10-compatibl... More Details >>
- No：23028
- Release Date：2018/09/03 17:31
- Update：2018/09/26 10:14
- Category： Network related products
Connecting terminating resistors for CC-Link communication

Connect terminating resistors to both ends of physical cables.A master station is not necessarily required to be connected to either end of its network. More Details >>
- No：23046
- Release Date：2018/09/03 17:31
- Category： Network related products

771-780 of Total 1023

Inquiries

page top