A terminating resistor must be connected to the interface in order to reduce signal reflections thus preventing the sign

General-purpose Ethernet cables that meet the 1000BASE-T standard (category 5e or higher) can be used. We recommend doub

The routing parameter settings are required for transient transmission to the CPU module with another network No. The re

It is necessary to reduce the link refresh time of the MELSECNET/H network in order to reduce the scan time. The link re

Use CC-Link dedicated cables. General-purpose cables cannot be used.

Possible causes are as follows.(1) Another master station exists on the same line.(2) Noise is detected on the line at p

The units of send data and receive data are shown below. - Fixed buffer data communications with the "Procedure Exist

The FX3U-ENET-L does not support the DHCP function. Set the fixed IP address using FX Configurator-EN-L. (FX Configurato

It is possible to connect to the cloud: MQTT broker (server) using the MQTT communication function of FX5-ENET. The MQTT

You can use "NZ2MC-1MBS", "NZ2MC-2MBS", "NZ2MC-4MBS", "NZ2MC-8MBS", "NZ2MC-16MBS",and "NZ2MC-8MBSE". You cannot use exte

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)

CPU Module(179)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(97)
Option(9)
Engineering Software(61)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

71-80 of Total 1010

prev 8 / 101page next

Terminating resistors for QJ71C24N

A terminating resistor must be connected to the interface in order to reduce signal reflections thus preventing the signal instabilities. More Details >>
- No：22982
- Release Date：2018/09/03 17:31
- Category： Network related products
Ethernet cables for the CC-Link IE Field Network

General-purpose Ethernet cables that meet the 1000BASE-T standard (category 5e or higher) can be used. We recommend double shielded cables. Recommended pro... More Details >>
- No：22989
- Release Date：2018/09/03 17:31
- Update：2019/06/27 15:47
- Category： Network related products
Settings required for transient transmission

The routing parameter settings are required for transient transmission to the CPU module with another network No. The request source station, relay station,... More Details >>
- No：22995
- Release Date：2018/09/03 17:31
- Update：2018/09/25 17:40
- Category： Network related products
Effect on sequence scans in MELSECNET/H networks

It is necessary to reduce the link refresh time of the MELSECNET/H network in order to reduce the scan time. The link refresh time can be reduced by reducin... More Details >>
- No：23018
- Release Date：2018/09/03 17:31
- Update：2018/09/26 09:27
- Category： Network related products
Cables for CC-Link networks

Use CC-Link dedicated cables. General-purpose cables cannot be used. More Details >>
- No：23027
- Release Date：2018/09/03 17:31
- Category： Network related products
Duplication error in a CC-Link master station

Possible causes are as follows.(1) Another master station exists on the same line.(2) Noise is detected on the line at power on. More Details >>
- No：23044
- Release Date：2018/09/03 17:31
- Category： Network related products
Data length for fixed buffer data communications by QJ71E71

The units of send data and receive data are shown below. - Fixed buffer data communications with the "Procedure Exist" control method: Words - Fixed buff... More Details >>
- No：23061
- Release Date：2018/09/03 17:31
- Update：2018/09/26 11:17
- Category： Network related products
Support of the DHCP (Dynamic Host Configuration Protocol) function by the FX3U-ENET-L (for Ethernet communications)

The FX3U-ENET-L does not support the DHCP function. Set the fixed IP address using FX Configurator-EN-L. (FX Configurator-EN-L can be downloaded from Mitsubi... More Details >>
- No：24869
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series
Regarding Cloud Connectivity

It is possible to connect to the cloud: MQTT broker (server) using the MQTT communication function of FX5-ENET. The MQTT communication function is supported... More Details >>
- No：40034
- Release Date：2023/08/24 15:39
- Category： MELSEC iQ-F Series , Network/Communication
Models of extended SRAM cassettes that can be used with MELSEC iQ-R series CPU modules

You can use "NZ2MC-1MBS", "NZ2MC-2MBS", "NZ2MC-4MBS", "NZ2MC-8MBS", "NZ2MC-16MBS",and "NZ2MC-8MBSE". You cannot use extended SRAM cassettes for the high-spe... More Details >>
- No：22468
- Release Date：2018/09/03 17:28
- Update：2018/09/21 16:36
- Category： MELSEC iQ-R Series

71-80 of Total 1010

Inquiries

page top