Auto refresh setting is for storing the buffer memory data of a MODBUS (R) interface module to specified devices of a CP

On the Project view of the Navigation window, select "Parameter" → "PLC Parameter" using GX Works2 (or GX Developer). Cl

The Web server function allows you to log in from up to four devices at the same time. You can't log in from the fifth m

Parameters can be set when connecting the MELSEC iQ-F series with FX5-CCL-MS(CC-Link system master/intelligent device).

Select [Online] -> [Write to PLC] on the menu of GX Developer, open the [File selection] tab, and press "Param + Prog

Use SP.FWRITE instruction to save the data to an ATA card in CSV format.For Q00UJCPU, Q00UCPU, and Q01UCPU, however, mem

Up to 1280 points. (128 points per setting, and up to 10 data logging settings)

The value depends on the type of cable in use. - Ver.1.10-compatible CC-Link dedicated cables: 110 ohm, 1/2W - CC-Link d

As project data, up to 32 one-byte characters (16 two-byte characters) can be input to each global device comment. Howev

The FX3U-ENET-ADP can be connected to the FX3G/FX3GC series (both Ver. 2.00 or later) and the FX3U/3UC series (both Ver.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)

CPU Module(179)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(97)
Option(9)
Engineering Software(61)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

851-860 of Total 1010

prev 86 / 101page next

Auto refresh setting in GX Configurator -MB

Auto refresh setting is for storing the buffer memory data of a MODBUS (R) interface module to specified devices of a CPU module and for storing device data ... More Details >>
- No：22573
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Externally switching the operating status of a programmable controller

On the Project view of the Navigation window, select "Parameter" → "PLC Parameter" using GX Works2 (or GX Developer). Click the "PLC System(1)" tab, and set ... More Details >>
- No：24768
- Release Date：2019/02/27 15:01
- Category： MELSEC-F Series , Engineering Software , Main Unit
Regarding simultaneous access to Web Server function

The Web server function allows you to log in from up to four devices at the same time. You can't log in from the fifth machine. More Details >>
- No：39330
- Release Date：2023/02/14 09:06
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding CC-Link settings using GX Works3

Parameters can be set when connecting the MELSEC iQ-F series with FX5-CCL-MS(CC-Link system master/intelligent device). However, when connecting with FX3U-1... More Details >>
- No：22317
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:19
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software , Network/Communication
Memory allocation for online change in GX Developer

Select [Online] -> [Write to PLC] on the menu of GX Developer, open the [File selection] tab, and press "Param + Prog" button. Then open the [Program] ta... More Details >>
- No：22547
- Release Date：2018/09/03 17:28
- Update：2018/09/20 15:09
- Category： MELSEC-Q Series
Writing files in CSV format

Use SP.FWRITE instruction to save the data to an ATA card in CSV format.For Q00UJCPU, Q00UCPU, and Q01UCPU, however, memory cards cannot be used thus data ca... More Details >>
- No：22652
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Number of data sampling points in LCPU logging function

Up to 1280 points. (128 points per setting, and up to 10 data logging settings) More Details >>
- No：22805
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Resistor value for CC-Link cables

The value depends on the type of cable in use. - Ver.1.10-compatible CC-Link dedicated cables: 110 ohm, 1/2W - CC-Link dedicated cables (Version 1.00): 110... More Details >>
- No：22983
- Release Date：2018/09/03 17:31
- Update：2018/10/03 14:42
- Category： Network related products
Maximum number of characters in a comment that can be transferred to a FX3U series

As project data, up to 32 one-byte characters (16 two-byte characters) can be input to each global device comment. However, the maximum number of characters ... More Details >>
- No：24700
- Release Date：2019/02/27 08:59
- Category： MELSEC-F Series , Engineering Software , Main Unit
FX3U-ENET-ADP connectable programmable controllers in the MELSEC-F series

The FX3U-ENET-ADP can be connected to the FX3G/FX3GC series (both Ver. 2.00 or later) and the FX3U/3UC series (both Ver. 3.10 or later). Products which are ... More Details >>
- No：24706
- Release Date：2019/02/27 09:00
- Category： MELSEC-F Series , Engineering Software , Main Unit , Network/Communication

851-860 of Total 1010

Inquiries

page top