Follow the procedure below.(1)Eliminate the error cause.(2) Store the error code to be cleared in SD50.(3)Turn OFF and O

In order for the programmable controller to receive input pulses completely, the ON duration and OFF duration of inputs

(1)Whether or not networks can be mixed on the same trunk line is different. CC-Link IE TSN allows network mixing on th

When connecting 2 FX5 CPU Modules (firmware version 1.110 or later) that support the Simple CPU communication function

The FX3U-ENET-L and FX3U-ENET-ADP are Ethernet-connectable. The FX3U-ENET-L can be used with the FX3U and FX3UC series

A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one a

The error code indicates a WDT (watchdog timer) error. It is determined as the cause that the MELSECNET/H driver cannot

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits fro

The earlier series of the FX programmable controllers are compatible with the latest series of the FX programmable contr

Ethernet standard-compatible cable, category 5 or higher (STP cable) can be used. *Straight cable can be used. When co

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)

CPU Module(179)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(97)
Option(9)
Engineering Software(61)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

881-890 of Total 1010

prev 89 / 101page next

How to clear errors

Follow the procedure below.(1)Eliminate the error cause.(2) Store the error code to be cleared in SD50.(3)Turn OFF and ON SM50.(4) The error is cleared. More Details >>
- No：22613
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Receiving short pulses

In order for the programmable controller to receive input pulses completely, the ON duration and OFF duration of inputs in the programmable controller requir... More Details >>
- No：24704
- Release Date：2019/02/27 09:00
- Category： MELSEC-F Series , Main Unit , High-Speed Counting
Regarding the differences between CC-Link IE TSN and CC-Link IE Field Networks

(1)Whether or not networks can be mixed on the same trunk line is different. CC-Link IE TSN allows network mixing on the same trunk line. When using a CC-Li... More Details >>
- No：39359
- Release Date：2023/01/12 17:10
- Category： MELSEC iQ-F Series , Network/Communication
Regarding setting the FX5 CPU Module that does not support the simple CPU communication function

When connecting 2 FX5 CPU Modules (firmware version 1.110 or later) that support the Simple CPU communication function and 2 FX5 CPU Modules (firmware vers... More Details >>
- No：44329
- Release Date：2024/03/20 13:35
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Ethernet-connectable modules in MELSEC-F

The FX3U-ENET-L and FX3U-ENET-ADP are Ethernet-connectable. The FX3U-ENET-L can be used with the FX3U and FX3UC series (both Ver. 2.21 or later). The FX3U-... More Details >>
- No：22270
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , Network/Communication
Regarding the system configuration of FX5-CCL-MS with FX5 CPU module

A total of two FX5-CCL-MS (CC-Link system master/intelligent device) can be connected: one as a master station and one as an intelligent device station. More Details >>
- No：22318
- Release Date：2018/08/30 13:55
- Update：2023/07/03 11:50
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Remedies for WDT errors on a MELSECNET/H board

The error code indicates a WDT (watchdog timer) error. It is determined as the cause that the MELSECNET/H driver cannot work due to a computer or OS hang, or... More Details >>
- No：22969
- Release Date：2018/09/03 17:31
- Category： Network related products
Assignment of input/output numbers (MELSEC-F series)

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits from 0 to 7 → from 10 to 17 → from 20 to... More Details >>
- No：24868
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series , Engineering Software , Main Unit
Transferring/editing programs in the previous FX programmable controllers using GX Works2

The earlier series of the FX programmable controllers are compatible with the latest series of the FX programmable controllers. More Details >>
- No：25012
- Release Date：2019/04/23 11:16
- Category： MELSEC-F Series , Engineering Software , Main Unit
Regarding the type of Ethernet connection cable

Ethernet standard-compatible cable, category 5 or higher (STP cable) can be used. *Straight cable can be used. When connecting directly to the computer, cr... More Details >>
- No：22295
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:23
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication

881-890 of Total 1010

Inquiries

page top