GX Developer Version 8.89T or later is supported.There are restrictions in some functions. For the details, refer to

The positioning operation starts just in 30 microseconds, with a maximum high speed output of 200k pulses per second. S-

Check the following. - Whether the external device specifies the port number of the corresponding connection to the L

To send simultaneous broadcast using UDP, set the parameters as follows.- Destination IP Address: FF.FF.FF.FFh - Destina

The error does not affect the CPU time. The CPU time is not set when a communication error occurs.

Yes. Note that SD memory cards are formatted at the factory. If an SD memory card needs to be reformatted, format it usi

This adapter is used to add a serial port to the L series CPU. It is not a serial communication module. It is used for s

It is fixed to 32 points from 10 to 2F.

The conversion speed is as follows. - High speed: 20 microseconds per channel- Medium speed: 80 microseconds per channel

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)

CPU Module(179)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(97)
Option(9)
Engineering Software(61)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

881-890 of Total 1010

prev 89 / 101page next

GX Developer support by LCPU

GX Developer Version 8.89T or later is supported.There are restrictions in some functions. For the details, refer to "Precautions on L Series Modules" in ... More Details >>
- No：22792
- Release Date：2018/09/03 17:30
- Update：2018/10/03 16:26
- Category： MELSEC-L Series
Built-in positioning function of LCPU

The positioning operation starts just in 30 microseconds, with a maximum high speed output of 200k pulses per second. S-curve acceleration/deceleration is al... More Details >>
- No：22790
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Causes to why SD1286 does not turn on during socket communication of LCPU

Check the following. - Whether the external device specifies the port number of the corresponding connection to the L series CPU. - In the TCP fixed-length... More Details >>
- No：22787
- Release Date：2018/09/03 17:30
- Update：2018/09/22 11:51
- Category： MELSEC-L Series
Simultaneous broadcast transmission setting for built-in Ethernet port LCPU

To send simultaneous broadcast using UDP, set the parameters as follows.- Destination IP Address: FF.FF.FF.FFh - Destination Port Number: Other than FFFFh (S... More Details >>
- No：22785
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
SNTP communication error in built-in Ethernet port LCPU

The error does not affect the CPU time. The CPU time is not set when a communication error occurs. More Details >>
- No：22783
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Battery model

Q6BAT. More Details >>
- No：22780
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Precautions for use of SD memory card

Yes. Note that SD memory cards are formatted at the factory. If an SD memory card needs to be reformatted, format it using the CPU module. More Details >>
- No：22779
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Application of RS-232 adapter L6ADP-R2

This adapter is used to add a serial port to the L series CPU. It is not a serial communication module. It is used for serial communication between a device ... More Details >>
- No：22778
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Number of points used for I/O assignment of L26CPU-(P)BT built-in CC-Link function

It is fixed to 32 points from 10 to 2F. More Details >>
- No：22777
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Conversion speed of L60AD4

The conversion speed is as follows. - High speed: 20 microseconds per channel- Medium speed: 80 microseconds per channel- Low speed: 1 millisecond per channel More Details >>
- No：22776
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series

881-890 of Total 1010

Inquiries

page top