FX5U CPU module has 2 built-in voltage input channels (DC0～10V) and 1 built-in voltage output channel (DC0～10V). If an

The error code "2400" is "FILE SET ERROR".It may be determined as the cause of the error that the file that has been spe

Yes.Beginning with the device in the "Device/Label Automatic-Assign Setting" window, devices are assigned in descending

Data stored in the programmable controller can be saved to a CF card using a FX3U-CF-ADP CF card special adapter for the

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later)

Replace the battery when the programmable controller is powered off. For example, for the FX3U/FX3UC series, data wil

Yes, it is. However, if the error cause is not eliminated, M8004 will turn on again after powering on. * How to chec

SM400 and SM8000. ※FX compatible area（SM8000～, SD8000～） is available for the special relay and special device.

Standard counters offer counting up to 10Hz. For high-speed input signals which exceed 10Hz, use high-speed counters, i

Numerical value data 0 to 255 corresponding to the scale position is stored in the special data register. You can creat

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)

CPU Module(179)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(97)
Option(9)
Engineering Software(61)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

891-900 of Total 1010

prev 90 / 101page next

Regarding the built-in analog input/output function

FX5U CPU module has 2 built-in voltage input channels (DC0～10V) and 1 built-in voltage output channel (DC0～10V). If an external resister is connected, the m... More Details >>
- No：22313
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:47
- Category： MELSEC iQ-F Series , CPU Module , Analog
Error code "2400" in QCPU

The error code "2400" is "FILE SET ERROR".It may be determined as the cause of the error that the file that has been specified by a parameter does not exist.... More Details >>
- No：22703
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Automatically assigned devices in GX Works2

Yes.Beginning with the device in the "Device/Label Automatic-Assign Setting" window, devices are assigned in descending order (from the greatest device numbe... More Details >>
- No：22846
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Data collection with FX programmable controller

Data stored in the programmable controller can be saved to a CF card usinga FX3U-CF-ADP CF card special adapter for the FX3U/FX3UC series. More Details >>
- No：24936
- Release Date：2019/04/18 14:24
- Category： MELSEC-F Series , Main Unit , Accessories
Parameter setting of the FX3U-16CCL-M

The parameters can be set by using network parameters of GX Works2 (Ver1.73B or later). (FX3U/3UC: Ver3.10 or later) More Details >>
- No：25013
- Release Date：2019/04/23 11:16
- Category： MELSEC-F Series , Engineering Software , Network/Communication
Battery replacement during power-on

Replacethe battery when the programmable controller is powered off. For example, forthe FX3U/FX3UC series, data will be held for about 20 seconds after be... More Details >>
- No：22257
- Release Date：2018/08/30 13:48
- Update：2019/02/19 11:54
- Category： MELSEC-F Series , Main Unit , Accessories
How to reset M8004 (Error occurrence)

Yes, it is. However, if the error cause is not eliminated, M8004 will turn on again after powering on. * How to check the error In the FX3S/FX3G/FX3GC/FX... More Details >>
- No：22280
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit
Regarding the function of a special relay.

SM400 and SM8000. ※FX compatible area（SM8000～, SD8000～） is available for the special relay and special device. More Details >>
- No：22288
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:09
- Category： MELSEC iQ-F Series , CPU Module
Distinguishing the usage of standard counters and high-speed counters

Standard counters offer counting up to 10Hz. For high-speed input signals which exceed 10Hz, use high-speed counters,interruption function, or another proce... More Details >>
- No：24785
- Release Date：2019/02/27 16:31
- Category： MELSEC-F Series , Engineering Software , Main Unit
How to use variable analog potentiometers in FX3S

Numerical value data 0 to 255 corresponding tothe scale position is stored in the special data register. You can create the analog timer (volume type) by sp... More Details >>
- No：22279
- Release Date：2018/08/30 13:48
- Update：2019/02/14 10:05
- Category： MELSEC-F Series , Main Unit , Analog Control

891-900 of Total 1010

Inquiries

page top