A link error has occurred in one of the slave stations in connection.Master station: Check the parameter again.Slave sta

The keyword protection cannot be forcibly reset. Since only the keyword that has been registered by the user is acceptab

For the first input extension block connecting to a main unit, use the FX2NC-100BPCB power supply cable provided with th

When changing the time by using the clock data write instruction (TWR), the control of M8015 (Clock stop/adjustment) is

It is used for switching between Sink/Source input. For sink input wiring, connect with "24V" terminal and short-circuit

Download the file directly under the C: drive and then install it.

The present scan time is stored in D8010. Monitor the value using a programming tool such as GX Works2 and GX Developer.

The station number setting is not required for non-protocol communication.

The keeping (latched device data) range is fixed and cannot be changed in parameters. (Reference) [When an optional bat

For MX Component Ver.5, Ver. 5.000A or later supports the FX5U/FX5UC/FX5UJ CPU modules, and Ver. 5.003D or later support

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

911-920 of Total 1023

prev 92 / 103page next

What makes the ERR LED flash in a CC-Link network

A link error has occurred in one of the slave stations in connection.Master station: Check the parameter again.Slave station: Reassess the power supply, the ... More Details >>
- No：23023
- Release Date：2018/09/03 17:31
- Category： Network related products
Keyword protection of the MELSEC-F series

The keyword protection cannot be forcibly reset. Since only the keyword that has been registered by theuser is acceptable, please take measures to ensure th... More Details >>
- No：24784
- Release Date：2019/02/27 16:27
- Category： MELSEC-F Series , Engineering Software , Main Unit
Power supply cable of the input extension blocks for the connector type programmable controllers

Forthe first input extension block connecting to a main unit, use the FX2NC-100BPCB power supply cable provided with the main unit, and supply power from a 2... More Details >>
- No：24911
- Release Date：2019/04/15 11:32
- Category： MELSEC-F Series , Main Unit , I/O Extension
Changing the time of a programmable controller by using the clock data write instruction (TWR)

When changing the time by using the clock data write instruction (TWR), the control of M8015 (Clock stop/adjustment) is not required. * When the clock data... More Details >>
- No：22266
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit
Regarding the "S/S" terminal.

It is used for switching between Sink/Source input. For sink input wiring, connect with "24V" terminal and short-circuit the "0V" and "input X***". For sou... More Details >>
- No：22286
- Release Date：2018/08/30 13:55
- Update：2022/12/22 09:39
- Category： MELSEC iQ-F Series , CPU Module , I/O Module
GX Works2 update installation procedure

Download the file directly under the C: drive and then install it. More Details >>
- No：22524
- Release Date：2018/09/03 17:28
- Update：2018/09/20 14:28
- Category： MELSEC-Q Series
How to check the scan time (MELSEC-F series)

The present scan time is stored in D8010. Monitor the valueusing a programming tool such as GX Works2 and GX Developer. More Details >>
- No：24685
- Release Date：2019/02/22 11:40
- Update：2019/02/22 15:07
- Category： MELSEC-F Series , Engineering Software , Main Unit
Station number setting in the "PLC System(2)" tab of PLC Parameter setting on GX Developer when non-protocol communication is performed

The station number setting is not required for non-protocol communication. More Details >>
- No：24948
- Release Date：2019/04/18 14:27
- Category： MELSEC-F Series , Main Unit , Network/Communication
How to change the keeping (latched device data) range (FX3G/FX3GC)

The keeping (latched device data) range is fixed and cannot be changed in parameters. (Reference) [When an optional battery is not used] The keeping ran... More Details >>
- No：22260
- Release Date：2018/08/30 13:48
- Update：2019/02/19 11:52
- Category： MELSEC-F Series , Engineering Software , Main Unit , Accessories
Regarding communication with MX Component

For MX Component Ver.5, Ver. 5.000A or later supports the FX5U/FX5UC/FX5UJ CPU modules, and Ver. 5.003D or later supports the FX5S CPU module. Also, both se... More Details >>
- No：22328
- Release Date：2018/08/30 13:55
- Update：2023/02/15 13:07
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software , Network/Communication

911-920 of Total 1023

Inquiries

page top