Local stations can obtain information about all device stations. Intelligent device stations can only obtain information

It is necessary to reduce the link refresh time of the MELSECNET/H network in order to reduce the scan time. The link re

Q02(H)CPU-A is the AnUCPU equivalent. When establishing a MELSECNET/10 network, set the refresh parameter with which SB/

Up to 40 modules. When the branch module and extension module are used, use L26CPU-(P)BT CPU modules whose first 5 digit

To receive simultaneous broadcast using UDP, set the parameters as follows. - Destination IP Address: FF.FF.FF.FFh - Des

(1) The number of modules to be connected- Main block: up to 10 modules- Extension block: up to 11 modules(2) The number

For the built-in Ethernet port in the L series CPU, the TCP retransmission timer setting is fixed and unchangeable. The

When GX Configurator-FL is used, programs for initial settings and cyclic data reading and writing are not needed.

When an entry code (2nd entry code) registration is set in the FX3U series, such error can occur.

It is not possible to extend the length of the extension cable to over 65cm. Place the main unit separately by using the

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

911-920 of Total 1023

prev 92 / 103page next

Regarding CC-Link IE Field Network Station Type

Local stations can obtain information about all device stations. Intelligent device stations can only obtain information about their own stations. FX5-CCLI... More Details >>
- No：39301
- Release Date：2023/01/12 16:52
- Category： MELSEC iQ-F Series , Network/Communication
Effect on sequence scans in MELSECNET/H networks

It is necessary to reduce the link refresh time of the MELSECNET/H network in order to reduce the scan time. The link refresh time can be reduced by reducin... More Details >>
- No：23018
- Release Date：2018/09/03 17:31
- Update：2018/09/26 09:27
- Category： Network related products
About network parameters when building MELSECNET/10 with Q02HCPU-A

Q02(H)CPU-A is the AnUCPU equivalent. When establishing a MELSECNET/10 network, set the refresh parameter with which SB/SW data is transferred to "Y/D" or o... More Details >>
- No：23005
- Release Date：2018/09/03 17:31
- Update：2018/09/26 14:42
- Category： Network related products
Maximum number of modules to be connected to L26CPU-(P)BT

Up to 40 modules. When the branch module and extension module are used, use L26CPU-(P)BT CPU modules whose first 5 digits of the serial number are "13072" or... More Details >>
- No：22813
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Simultaneous broadcast reception setting for built-in Ethernet port LCPU

To receive simultaneous broadcast using UDP, set the parameters as follows. - Destination IP Address: FF.FF.FF.FFh - Destination Port No.: Other than FFFFh (... More Details >>
- No：22772
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
The number of LCPU extension blocks

(1) The number of modules to be connected- Main block: up to 10 modules- Extension block: up to 11 modules(2) The number of extension blocks- L02CPU, L02CPU-... More Details >>
- No：22750
- Release Date：2018/09/03 17:29
- Category： MELSEC-L Series
TCP retransmission timer setting for built-in Ethernet port LCPU

For the built-in Ethernet port in the L series CPU, the TCP retransmission timer setting is fixed and unchangeable. The retransmission occurs six times. The... More Details >>
- No：22745
- Release Date：2018/09/03 17:29
- Update：2018/09/21 17:52
- Category： MELSEC-L Series
Ladder programs for GX Configurator-FL

When GX Configurator-FL is used, programs for initial settings and cyclic data reading and writing are not needed. More Details >>
- No：22658
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Connection of FX-20P and FX3U series

Whenan entry code (2nd entry code) registration is set in the FX3U series, sucherror canoccur. More Details >>
- No：24983
- Release Date：2019/04/23 07:21
- Category： MELSEC-F Series , Accessories
Extending the extension cable

It is not possible to extend the length of the extension cable to over 65cm. Place the main unit separately by using the parallel link or N:N Network functio... More Details >>
- No：24941
- Release Date：2019/04/18 14:25
- Category： MELSEC-F Series , Accessories

911-920 of Total 1023

Inquiries

page top