Use of END cover with the branch module and extension module

Use an END cover applicable to the following. - The L6EC whose serial number (first six digits) is "*****2" or later- END cover with ERR terminal (optional i... More Details >>

Connected position of branch module and extension module

The position to connect the branch module and extension module is as follows. More Details >>

Maximum number of modules to be connected to L26CPU-(P)BT

Up to 40 modules. When the branch module and extension module are used, use L26CPU-(P)BT CPU modules whose first 5 digits of the serial number are "13072" or... More Details >>

File switching timing of L series logging function

No. More Details >>

Precautions for use of SD memory card

Yes. Note that SD memory cards are formatted at the factory. If an SD memory card needs to be reformatted, format it using the CPU module. More Details >>

Number of points used for I/O assignment of L26CPU-(P)BT built-in CC-Link function

It is fixed to 32 points from 10 to 2F. More Details >>

FNC connector pin layout in L series I/O module and Q series I/O module

Yes. They have the same pin layout. More Details >>

Compliance with SEMI-F47 for L series power supply module

Use the following power supply module with an input power of 200 VAC for compliance with SEMI-F47. - Power supply module: L61PWith an input power of 100 VAC,... More Details >>

Connection status detection between a hub and the built-in Ethernet port of LCPU

The bit 10 of the special register SD1288 provides the connection status to a hub. When the bit 10 of SD1288 is ON, a hub is connected. More Details >>

Use of an A-compatible 1E frame for the built-in Ethernet port of LCPU

The built-in Ethernet port in the L series is compatible only with a QnA-compatible 3E frame of the MC protocol. An A-compatible 1E frame is not supported. More Details >>