The model name of the power cable is FX2NC-100MPCB. It is included with the FX5UC CPU module and intelligent function mo

There are three types of configuration: GX Works3, special devices (SM/SD), and instructions. ・How to Configure in GX

For MX Component Ver.5, Ver. 5.000A or later supports the FX5U/FX5UC/FX5UJ CPU modules, and Ver. 5.003D or later support

The error code "2200" is "MISSING PARA.". The cause of the error is that a parameter file does not exist in all drives w

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project an

D200 to D7999 and R0 to R32767 can be latched. D200 to D511 can be set as non-latch areas in parameters. For details o

It is necessary to set the latch range from the following GX Works3 parameters: [Navigation Window] -> [CPU Paramete

RS-232 is selected as PC side I/F in Transfer Setup of GX Developer or GX Works2.Change the setting in PC side I/F to US

It is possible to use latch devices or I/O devices (X/Y) for link refresh devices. However, when using I/O devices (X/Y

The USB driver is not installed.The driver needs to be separately installed before the first connection to a CPU module.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)

CPU Module(179)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(97)
Option(9)
Engineering Software(61)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

971-980 of Total 1010

prev 98 / 101page next

Regarding the FX5UC CPU module/Intelligent Function module Power Cable

The model name of the power cable is FX2NC-100MPCB. It is included with the FX5UC CPU module and intelligent function modules that require power from the pow... More Details >>
- No：40021
- Release Date：2023/08/24 14:31
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication , Motion/Positioning , Analog
Regarding FX5 CPU Module clock settings

There are three types of configuration: GX Works3, special devices (SM/SD), and instructions. ・How to Configure in GX Works3 　(1) In GX Works3, select On... More Details >>
- No：44365
- Release Date：2024/03/27 17:01
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding communication with MX Component

For MX Component Ver.5, Ver. 5.000A or later supports the FX5U/FX5UC/FX5UJ CPU modules, and Ver. 5.003D or later supports the FX5S CPU module. Also, both se... More Details >>
- No：22328
- Release Date：2018/08/30 13:55
- Update：2023/02/15 13:07
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software , Network/Communication
Error code "2200" in the universal model QCPU

The error code "2200" is "MISSING PARA.". The cause of the error is that a parameter file does not exist in all drives where parameters will be valid.As a re... More Details >>
- No：22614
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Regarding a mismatch found in the monitoring function of GX Works3

Perform "Rebuild All" and initialize the memory before writing to the PLC. "Rebuild All" converts the entire project and "Convert" only coverts the modified... More Details >>
- No：22293
- Release Date：2018/08/30 13:55
- Update：2023/02/13 15:31
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Latch (backup) areas in the data register (D) and extended register (R) of the FX3U/FX3UC series

D200 to D7999 and R0 to R32767 can be latched. D200 to D511 can be set as non-latch areas in parameters. For details on the parameter setting, refer to the... More Details >>
- No：24699
- Release Date：2019/02/27 08:58
- Category： MELSEC-F Series , Engineering Software , Main Unit
Regarding the latch settings of data register

It is necessary to set the latch range from the following GX Works3 parameters: [Navigation Window] -> [CPU Parameters] -> [Device/Memory Settings] -&... More Details >>
- No：22329
- Release Date：2018/08/30 13:55
- Update：2024/11/11 13:49
- Category： CPU Module , Engineering Software
When the message "An unusable COM port was specified" is displayed

RS-232 is selected as PC side I/F in Transfer Setup of GX Developer or GX Works2.Change the setting in PC side I/F to USB. More Details >>
- No：22517
- Release Date：2018/09/03 17:28
- Category： MELSEC-Q Series
Regarding the link refresh settings of FX5-CCL-MS

It is possible to use latch devices or I/O devices (X/Y) for link refresh devices. However, when using I/O devices (X/Y), use I/O numbers (such as X1000 ~/Y... More Details >>
- No：22308
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:37
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software , Network/Communication
GX Works2's USB driver installation procedure

The USB driver is not installed.The driver needs to be separately installed before the first connection to a CPU module. More Details >>
- No：22507
- Release Date：2018/09/03 17:28
- Category： MELSEC-Q Series

971-980 of Total 1010

Inquiries

page top