The control power supply of the earth leakage detection circuit is taken from the inside of Earth Leakage Circuit Breake

It is a characteristic that operating time inversely become shorter as current increases. For Molded Case Circuit Breake

It means that it does not interfere with tripping operation even if a handle is held at "ON" position. (It trips when an

In that case, the rated current and the rated voltage shall be reduced. Refer to the table of derating factors as below.

All our products are compliant with CCC (China Compulsory Certification).

It is the number that can be opened/closed per hour under the conditions specified in the standard.

AL (Alarm switch) is a switch which electrically displays tripping state of a circuit breaker.The markings of the switch

It is from -25 to 55℃ in Trip or OFF position. However, it shall be in an environment without condensation and freezing

It is necessary to use AL and AX switches that are suitable for the specification of PLC input unit. Generally AL and AX

The knob of the sensitivity current selector is set to the maximum value when shipping in order to prevent unwanted eart

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products > Low-voltage Circuit Breakers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Circuit Breakers

Miniature Circuit Breakers(2)

FAQ within [ Low-voltage Circuit Breakers ]

21-30 of Total 123

prev 3 / 13page next

ELCB installation

The control power supply of the earth leakage detection circuit is taken from the inside of Earth Leakage Circuit Breaker. If used on the secondary side of t... More Details >>
- No：22372
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers
Inverse time delay operating characteristic

It is a characteristic that operating time inversely become shorter as current increases. For Molded Case Circuit Breakers, protection characteristic meeting... More Details >>
- No：22387
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Trip free

It means that it does not interfere with tripping operation even if a handle is held at "ON" position. (It trips when an overcurrent flows even if a handle i... More Details >>
- No：22378
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
MCCB, ELCB and ACB at higher altitudes

In that case, the rated current and the rated voltage shall be reduced. Refer to the table of derating factors as below. More Details >>
- No：24801
- Release Date：2019/04/09 15:17
- Category： Molded Case Circuit Breakers
CCC certification

All our products are compliant with CCC (China Compulsory Certification). More Details >>
- No：22386
- Release Date：2018/08/31 14:33
- Category： Circuit Breakers for Use in Particular Applications
Operating cycles

It is the number that can be opened/closed per hour under the conditions specified in the standard. More Details >>
- No：22436
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
AL

AL (Alarm switch) is a switch which electrically displays tripping state of a circuit breaker.The markings of the switch are 8/ALa, 96/ALb and 95/ALc.*When t... More Details >>
- No：22350
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
Storage temperature range of MCCBs and ELCBs

It is from -25 to 55℃ in Trip or OFF position. However, it shall be in an environment without condensation and freezing even in a short time. More Details >>
- No：22426
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
AL/AX direct connection to PLC

It is necessary to use AL and AX switches that are suitable for the specification of PLC input unit. Generally AL and AX switch for micro-load are used for i... More Details >>
- No：22398
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
Default setting from the factory

The knob of the sensitivity current selector is set to the maximum value when shipping in order to prevent unwanted earth leakage tripping when Earth Leakage... More Details >>
- No：22391
- Release Date：2018/08/31 14:33
- Category： Earth Leakage Circuit Breakers

21-30 of Total 123

Inquiries

page top