Major error 093CH occurs when the absolute position is erased.Execute the home position return after checking the batter

There are three types of parameters in GX Works3; "System parameter", "CPU parameter", and "Module parameter". You can

The main units with Ver.2.00 or later can read and write programs of the FX3 series connected to the intelligent device

Data stored in the programmable controller can be saved to a CF card using a FX3U-CF-ADP CF card special adapter for the

Torque is limited by the lower set value of "[Pr.17] Torque limit setting value" and "[Cd.22] New torque value".When the

The control response parameter can set the response to the target value (SV) of PID control as either "normal" or "fast"

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits fro

GX Works2 with Ver. 1.87R or later is required.

The "FX2NC-100MPCB" power supply cable for main unit is provided with the FX3UC-16MR/DS-T. The "FX2NC-100MPCB" and the "

The error code "2400" is "FILE SET ERROR".It may be determined as the cause of the error that the file that has been spe

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1702)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

181-190 of Total 1110

prev 19 / 111page next

Major error 093CH

Major error 093CH occurs when the absolute position is erased.Execute the home position return after checking the batteries of the Motion CPU module and the ... More Details >>
- No：23562
- Release Date：2018/09/14 15:09
- Category： RnMTCPU
Parameters of GX Works3

There are three types of parameters in GX Works3; "System parameter", "CPU parameter", and "Module parameter". You can set the following items with each par... More Details >>
- No：22483
- Release Date：2018/09/03 17:28
- Update：2018/09/19 16:08
- Category： MELSEC iQ-R Series
Supported versions of the FX3G/FX3GC series main units for accessing the other station from CC-Link using the FX3U-16CCL-M CC-Link master block

The main units with Ver.2.00 or later can read and write programs of the FX3 series connected to the intelligent device station and can monitor devices. (GX... More Details >>
- No：24950
- Release Date：2019/04/18 14:27
- Category： MELSEC-F Series , Main Unit , Network/Communication
Data collection with FX programmable controller

Data stored in the programmable controller can be saved to a CF card usinga FX3U-CF-ADP CF card special adapter for the FX3U/FX3UC series. More Details >>
- No：24936
- Release Date：2019/04/18 14:24
- Category： MELSEC-F Series , Main Unit , Accessories
Torque limit

Torque is limited by the lower set value of "[Pr.17] Torque limit setting value" and "[Cd.22] New torque value".When the current torque reaches the limit, "b... More Details >>
- No：23592
- Release Date：2018/09/14 15:09
- Category： QD75M
Regarding Control response parameter of built-in PID Control of CPU Module

The control response parameter can set the response to the target value (SV) of PID control as either "normal" or "fast". The difference is as follows. (1)W... More Details >>
- No：44653
- Release Date：2025/03/18 10:23
- Category： MELSEC iQ-F Series , CPU Module , Analog
Assignment of input/output numbers (MELSEC-F series)

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits from 0 to 7 → from 10 to 17 → from 20 to... More Details >>
- No：24868
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series , Engineering Software , Main Unit
Settings for the FX3U-ENET-ADP

GX Works2 with Ver. 1.87R or later is required.　 More Details >>
- No：24781
- Release Date：2019/02/27 16:10
- Category： MELSEC-F Series , Engineering Software , Network/Communication
Accessories of the FX3UC-16MR/DS-T and the FX3UC-16MR/D-T

The "FX2NC-100MPCB" power supply cable for main unit is provided with the FX3UC-16MR/DS-T. The "FX2NC-100MPCB" and the "FX2NC-100BPCB" power supply cable for... More Details >>
- No：25005
- Release Date：2019/04/23 11:11
- Category： MELSEC-F Series , Main Unit , Accessories
Error code "2400" in QCPU

The error code "2400" is "FILE SET ERROR".It may be determined as the cause of the error that the file that has been specified by a parameter does not exist.... More Details >>
- No：22703
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series

181-190 of Total 1110

Inquiries

page top