The following settings are required for the "Open Setting" for the number of connected external devices.- Protocol: "UDP

Use SP.FWRITE instruction to save the data to an ATA card in CSV format.For Q00UJCPU, Q00UCPU, and Q01UCPU, however, mem

The constant scan initial value in the simulation function is 100ms. Thus, the value of SM410(0.1sec. clock) is OFF in e

The MX-F Model can be connected to the intelligent function modules of the iQ-F series. Connectable intelligent functi

Forward (FP) and reverse (RP) pulse or pulse (PLS) with direction (DIR) can be selected.

For communications using MELSOFT connection, such as GX Developer, GX Works2, GOT1000, and MX Component, up to two perso

A CC-Link slave station number can be skipped by assigning the skipped number to a reserved station. A reserved station

There are two modes of transient transmission, cyclic transmission and transient transmission, for the communication bet

Select [View] -> [Cross reference window] from the menu in GX Developer to display the cross reference window.

MX Component Version 4 supports the L series CPU.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1702)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

721-730 of Total 1110

prev 73 / 111page next

LCPU built-in Ethernet port setting when using the simple PLC communication function

The following settings are required for the "Open Setting" for the number of connected external devices.- Protocol: "UDP"- Open System: "MELSOFT connection" More Details >>
- No：22739
- Release Date：2018/09/03 17:29
- Category： MELSEC-L Series
Writing files in CSV format

Use SP.FWRITE instruction to save the data to an ATA card in CSV format.For Q00UJCPU, Q00UCPU, and Q01UCPU, however, memory cards cannot be used thus data ca... More Details >>
- No：22652
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series
Behavior of special relay in simulation

The constant scan initial value in the simulation function is 100ms. Thus, the value of SM410(0.1sec. clock) is OFF in each scan. To turn ON/OFF SM410, set ... More Details >>
- No：22521
- Release Date：2018/09/03 17:28
- Update：2018/09/20 14:23
- Category： MELSEC-Q Series
Regarding connectable Intelligent Function modules

The MX-F Model can be connected to the intelligent function modules of the iQ-F series. Connectable intelligent function modules are shown below. More Details >>
- No：44983
- Release Date：2025/05/08 09:06
- Category： MELSEC MX Controller MX-F Model
Pulse output system of the FX3U-1PG pulse output block

Forward (FP) and reverse (RP) pulse or pulse (PLS) with direction (DIR) can be selected. More Details >>
- No：24957
- Release Date：2019/04/18 14:28
- Category： MELSEC-F Series , Positioning Control
Maximum number of personal computers that can be communicated with the FX3U-ENET-L simultaneously

For communications using MELSOFT connection, such as GX Developer, GX Works2, GOT1000, and MX Component, up to two personal computers can be used. In additi... More Details >>
- No：24920
- Release Date：2019/04/17 11:41
- Category： MELSEC-F Series , Network/Communication
Setting required to skip CC-Link slave station numbers

A CC-Link slave station number can be skipped by assigning the skipped number to a reserved station. A reserved station is counted as one of all the connecte... More Details >>
- No：23029
- Release Date：2018/09/03 17:31
- Category： Network related products
Communication between a CC-Link master station and local stations

There are two modes of transient transmission, cyclic transmission and transient transmission, for the communication between a master station and a local sta... More Details >>
- No：23006
- Release Date：2018/09/03 17:31
- Update：2018/09/26 13:53
- Category： Network related products
The cross reference window is not displayed.

Select [View]-> [Cross reference window] from the menu in GX Developer to display the cross reference window. More Details >>
- No：22951
- Release Date：2018/09/03 17:30
- Update：2018/09/25 11:54
- Category： Engineering Software
MX Component Version 4's compatibility with the L series CPU

MX Component Version 4 supports the L series CPU. More Details >>
- No：22867
- Release Date：2018/09/03 17:30
- Category： Engineering Software

721-730 of Total 1110

Inquiries

page top