F2-40BL: Lithium thionyl chloride primary battery FX2NC-32BL: Lithium thionyl chloride primary battery FX3U-32BL: Mangan

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be

As project data, up to 32 one-byte characters (16 two-byte characters) can be input to each global device comment. Howev

The built-in CC-Link/LT setting differs. For the FX3UC-32MT-LT, the built-in CC-Link/LT setting is performed with the

The communication format can be set in the communication setting of a sequence program or "PLC Parameter setting" using

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits fro

The remote input device and the remote output device cannot be assigned in network parameters. To assign them, create a

For AC power supply type, connect the 24+ terminal of an extension block to the 24+ terminal of a main unit. For DC pow

Scan time displayed on GX Works2 is the maximum scan time of the monitor target programmable controller CPU. To check c

Replace the battery when the programmable controller is powered off. For example, for the FX3U/FX3UC series, data wil

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC-F Series

Accessories(33)

FAQ within [ MELSEC-F Series ]

51-60 of Total 198

prev 6 / 20page next

Types of Batteries used in MELSEC-F

F2-40BL: Lithium thionyl chloride primary battery FX2NC-32BL: Lithium thionyl chloride primary battery FX3U-32BL: Manganese dioxide lithium primary battery F... More Details >>
- No：22265
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , Accessories
Supported versions of the FX3U/FX3UC series main units for the CC-Link parameter settings using GX Works2

Ver.3.10 or later is applicable. (GX Works2 with Ver.1.73B or later is applicable.) The version of the main unit can be checked with the last three digits of... More Details >>
- No：24918
- Release Date：2019/04/17 11:40
- Category： MELSEC-F Series , Main Unit
Maximum number of characters in a comment that can be transferred to a FX3U series

As project data, up to 32 one-byte characters (16 two-byte characters) can be input to each global device comment. However, the maximum number of characters ... More Details >>
- No：24700
- Release Date：2019/02/27 08:59
- Category： MELSEC-F Series , Engineering Software , Main Unit
Differences between the FX3UC-32MT-LT and the FX3UC-32MT-LT2

The built-in CC-Link/LT setting differs. For the FX3UC-32MT-LT, the built-in CC-Link/LT setting is performed with the DIP switch. For the FX3UC-32MT-LT2, th... More Details >>
- No：24956
- Release Date：2019/04/18 14:28
- Category： MELSEC-F Series , Main Unit , Network/Communication
Communication format setting

The communication format can be set in the communication setting of a sequence program or "PLC Parameter setting" using GX Developer. To avoid setting troub... More Details >>
- No：24929
- Release Date：2019/04/17 11:42
- Category： MELSEC-F Series , Engineering Software , Main Unit
Assignment of input/output numbers (MELSEC-F series)

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits from 0 to 7 → from 10 to 17 → from 20 to... More Details >>
- No：24868
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series , Engineering Software , Main Unit
Assignment of remote input device and remote output device of FX3U-16CCL-M

The remote input device and the remote output device cannot be assigned in network parameters. To assign them, create a program for updating data. For de... More Details >>
- No：24792
- Release Date：2019/02/28 09:08
- Category： MELSEC-F Series , Engineering Software , Network/Communication
24+ terminal connection of an extension block

For AC power supply type, connect the 24+ terminal of an extension block to the 24+ terminal of a main unit. For DC power supply type, connect the 24+ termi... More Details >>
- No：24786
- Release Date：2019/02/28 09:06
- Category： MELSEC-F Series , Main Unit , I/O Extension
Scan time while operation of a programmable controller CPU is being monitored using GX Works2

Scan time displayed on GX Works2 is the maximum scan time of the monitor target programmable controller CPU. To check current scan time, monitor the data in... More Details >>
- No：24779
- Release Date：2019/02/27 15:58
- Category： MELSEC-F Series , Engineering Software , Main Unit
Battery replacement during power-on

Replacethe battery when the programmable controller is powered off. For example, forthe FX3U/FX3UC series, data will be held for about 20 seconds after be... More Details >>
- No：22257
- Release Date：2018/08/30 13:48
- Update：2019/02/19 11:54
- Category： MELSEC-F Series , Main Unit , Accessories

51-60 of Total 198

Inquiries

page top