Please check the register addresses. The register address for the present value of the power factor of each phase is “

It is a protection method which only trips the related circuit breaker and other fault-free circuit does not trip and co

Shunt Trip for CP30-BA can be provided. However, the pole of that with Shunt Trip is "Relay type" without overcurrent tr

It is the number that can be opened/closed per hour under the conditions specified in the standard.

AE-SW 4-poles with WS relay (general protection) has overcurrent protection for neutral-pole. The tripping characterist

It is possible to measure the received energy and the transferred energy separately.

It is voltage which ensures withstand voltage and it is used as basis to determine insulation distance.

It is possible to produce micro-load AL and AX switch for MCCBs/ELCBs. However, if you need the products compatible with

It is a general starting method that applies full voltage to a motor in orderto start and stop. It is also called Full v

This model does NOT comply with the IEC61850.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Low-voltage Power Distribution Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Low-voltage Power Distribution Products

Low-voltage Circuit Breakers(124)

Air Circuit Breakers(23)
Molded Case Circuit Breakers(49)
Earth Leakage Circuit Breakers(21)
Circuit Breakers for Equipment(2)
Circuit Breakers for Use in Particular Applications(6)
Accessories and Related Components(21)
Miniature Circuit Breakers(2)
Contactors and Motor Starters(142)

Motor Starters(142)

Power Management Meters(57)

Electrical Indicators(57)

FAQ within [ Low-voltage Power Distribution Products ]

31-40 of Total 322

prev 4 / 33page next

Indication values of the main body is different from an obtained value through MODBUS RTU/ TCP (ME96SS series).

Please check the register addresses. The register address for the present value of the power factor of each phase is “0789”. There are the register addre... More Details >>
- No：22191
- Release Date：2018/08/27 16:41
- Category： Electrical Indicators
Selective coordination

It is a protection method which only trips the related circuit breaker and other fault-free circuit does not trip and continues power supply in the event of... More Details >>
- No：22366
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
CP30-BA　SHT trip device

Shunt Trip for CP30-BA can be provided. However, the pole of that with Shunt Trip is "Relay type" without overcurrent tripping element. Internal circuit is "... More Details >>
- No：22423
- Release Date：2018/08/31 14:33
- Category： Circuit Breakers for Equipment
Operating cycles

It is the number that can be opened/closed per hour under the conditions specified in the standard. More Details >>
- No：22436
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Release element in neutral (4P breaker)

AE-SW 4-poles with WS relay (general protection) has overcurrent protection for neutral-pole. The tripping characteristic is same as phase-pole. Moreover, A... More Details >>
- No：22441
- Release Date：2018/08/31 14:33
- Category： Air Circuit Breakers
Measuring received energy and the transferred energy (ME96SS series).

It is possible to measure the received energy and the transferred energy separately. More Details >>
- No：22176
- Release Date：2018/08/27 16:41
- Update：2020/04/10 16:53
- Category： Electrical Indicators
Rated insulation voltage

It is voltage which ensures withstand voltage and it is used as basis to determine insulation distance. More Details >>
- No：22362
- Release Date：2018/08/31 14:33
- Category： Molded Case Circuit Breakers
Micro-load AL and AX switch

It is possible to produce micro-load AL and AX switch for MCCBs/ELCBs. However, if you need the products compatible with the standards (CE marking product an... More Details >>
- No：22413
- Release Date：2018/08/31 14:33
- Category： Accessories and Related Components
About Low-voltage Power Distribution Products

It is a general starting method that applies full voltage to a motor in orderto start and stop. It is also called Full voltage starting. More Details >>
- No：23256
- Release Date：2018/09/12 15:11
- Category： Motor Starters
Support status for IEC61850 (ME96SS series).

This model does NOT comply with the IEC61850. More Details >>
- No：22147
- Release Date：2018/08/27 16:41
- Update：2020/04/10 15:11
- Category： Electrical Indicators

31-40 of Total 322

Inquiries

page top