The main units with Ver.2.00 or later can read and write programs of the FX3 series connected to the intelligent device

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits from

Yes. You can check the servo status through the following monitor data. • "[Md.108] Servo status 1" • "[Md.119] Servo st

You do not have to uninstall GX Works2 before installing GX Works3. You can install GX Works3 into your computer where G

It is possible by setting the scaling function or shift function from the parameter settings.

Although the connection with FX2N series I/O modules, FX2 series intelligent function modules, and FX3 series special ad

To rewrite the current value, arbitrary values can be written using the DHCMOV instruction. (Example) Set the current v

Global and local labels have the following differences. Global Label ・This label is available to all programs in the pro

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3GC series. * The FX3U-ENET-ADP is

Yes. A USB driver needs to be installed.For the installation procedure, refer to the following manual. - GX Developer V

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1731)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

171-180 of Total 1123

prev 18 / 113page next

Supported versions of the FX3G/FX3GC series main units for accessing the other station from CC-Link using the FX3U-16CCL-M CC-Link master block

The main units with Ver.2.00 or later can read and write programs of the FX3 series connected to the intelligent device station and can monitor devices. (GX... More Details >>
- No：24950
- Release Date：2019/04/18 14:27
- Category： MELSEC-F Series , Main Unit , Network/Communication
Assignment of input/output numbers (MELSEC-F series)

Octal numbers are assigned as input/output numbers for the MELSEC-F series. The octal number system uses the digits from 0 to 7 → from 10 to 17 → from 20 to... More Details >>
- No：24868
- Release Date：2019/04/15 08:06
- Category： MELSEC-F Series , Engineering Software , Main Unit
Servo status

Yes. You can check the servo status through the following monitor data. • "[Md.108] Servo status 1" • "[Md.119] Servo status 2" • "[Md.125] Servo status 3... More Details >>
- No：23589
- Release Date：2018/09/14 15:09
- Update：2023/03/09 10:24
- Category： RD77MS , RD77GF , FX5SSC
Uninstalling GX Works2 before the installation of GX Works3

You do not have to uninstall GX Works2 before installing GX Works3. You can install GX Works3 into your computer where GX Works2 has already been installed. More Details >>
- No：22464
- Release Date：2018/09/03 17:28
- Update：2018/09/18 16:20
- Category： MELSEC iQ-R Series
Regarding the digital output of the built-in analog function

It is possible by setting the scaling function or shift function from the parameter settings. More Details >>
- No：22315
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:46
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regardng compatability with other product series

Although the connection with FX2N series I/O modules, FX2 series intelligent function modules, and FX3 series special adater is not possible, FX3 series inte... More Details >>
- No：22309
- Release Date：2018/08/30 13:55
- Update：2022/12/22 09:46
- Category： MELSEC iQ-F Series , CPU Module , I/O Module
Regarding changing the current value of the high-speed counter.

To rewrite the current value, arbitrary values can be written using the DHCMOV instruction. (Example) Set the current value of the high-speed counter ch1 ... More Details >>
- No：22303
- Release Date：2018/08/30 13:55
- Update：2023/02/06 17:05
- Category： MELSEC iQ-F Series , CPU Module , High-Speed Counter
Regarding understanding the differences between Global and Local Labels

Global and local labels have the following differences. Global Label ・This label is available to all programs in the project. ・You can also allocate any d... More Details >>
- No：44622
- Release Date：2024/11/28 16:13
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Number of FX3U-ENET-ADP Ethernet communication special adapters that can be connected to the FX3GC series

One FX3U-ENET-ADP can be connected at the last stage (left end) of adapters for the FX3GC series. * The FX3U-ENET-ADP is a communication special adapter and... More Details >>
- No：24967
- Release Date：2019/04/23 07:18
- Category： MELSEC-F Series , Main Unit , Network/Communication
USB driver installation

Yes. A USB driver needs to be installed.For the installation procedure, refer to the following manual. - GX Developer Version 8 Operating Manual (Startup) More Details >>
- No：22504
- Release Date：2018/09/03 17:28
- Update：2018/09/20 13:10
- Category： MELSEC-Q Series

171-180 of Total 1123

Inquiries

page top