The main units with Ver.3.10 or later can read and write programs of the FX3 series connected to the intelligent device

There are two types of terminating resistors for CC-Link communication. Both two types are packaged with a CC-Link maste

"PC Parameter" in GX Works2 is "Parameter" in GX Works3. You can set the I/O assignment from "Module Configuration" or

The connection using the Ethernet port can establish a total of 8 connections which includes SLMP, MELSOFT connection, M

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versi

You can use the SWAP (P) command to swap the upper and lower bytes of the specified device.

It can be used in the FX3G series main units with Ver. 1.10 or later.

The error code "2200" is "MISSING PARA.". The causes of the error are described below. (1) The necessary parameter fi

Follow the procedure below.(1)Eliminate the error cause.(2) Store the error code to be cleared in SD50.(3)Turn OFF and O

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Automation Controllers MELSEC(28)

MELSEC MX Controller MX-R Model
MELSEC MX Controller MX-F Model(28)
MELSEC MX Controller Engineering Software
Programmable Controllers MELSEC(1702)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)

Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

221-230 of Total 1110

prev 23 / 111page next

Supported versions of the FX3U/FX3UC series main units for accessing the other station of CC-Link using the FX3U-16CCL-M CC-Link master block

The main units with Ver.3.10 or later can read and write programs of the FX3 series connected to the intelligent device station and can monitor devices. (GX ... More Details >>
- No：24990
- Release Date：2019/04/23 10:37
- Category： MELSEC-F Series , Main Unit , Network/Communication
Terminating resistors for CC-Link communication

There are two types of terminating resistors for CC-Link communication. Both two types are packaged with a CC-Link master/local module. (1) 110 ohm, 1/2W (B... More Details >>
- No：22963
- Release Date：2018/09/03 17:31
- Update：2018/09/26 14:47
- Category： Network related products
I/O assignment of PLC parameters with GX Works3

"PC Parameter" in GX Works2 is "Parameter" in GX Works3. You can set the I/O assignment from "Module Configuration" or "System Parameter". <Setting fr... More Details >>
- No：22475
- Release Date：2018/09/03 17:28
- Update：2018/09/19 14:42
- Category： MELSEC iQ-R Series
Regarding the specifications of the built-in Ethernet function of FX5 CPU module

The connection using the Ethernet port can establish a total of 8 connections which includes SLMP, MELSOFT connection, MODBUS/TCP, socket communication, and ... More Details >>
- No：22320
- Release Date：2018/08/30 13:55
- Update：2023/07/04 15:52
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding number of CH of CPU Module built-in Heating/Cooling PID control

The CPU Module's built-in Heating/Cooling PID control function supports up to 16 channels. The following firmware versions are required in order to use it. ... More Details >>
- No：44651
- Release Date：2025/03/18 10:22
- Category： MELSEC iQ-F Series , CPU Module , Analog
Regarding swapping upper and lower bytes of string data

You can use the SWAP (P) command to swap the upper and lower bytes of the specified device. More Details >>
- No：44361
- Release Date：2024/03/27 15:55
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Using the inverter communication instruction in FX3G series

It can be used in the FX3G series main units with Ver. 1.10 or later. More Details >>
- No：24961
- Release Date：2019/04/23 07:17
- Category： MELSEC-F Series , Main Unit , Network/Communication
File format that can be saved to a CF card in the FX3U-CF-ADP

CSV file can be saved. More Details >>
- No：24938
- Release Date：2019/04/18 14:24
- Category： MELSEC-F Series , Main Unit , Accessories
Error code "2200" in LCPU

The error code "2200" is "MISSING PARA.". The causes of the error are described below. (1) The necessary parameter file does not exist in all drives. (2) ... More Details >>
- No：22749
- Release Date：2018/09/03 17:29
- Update：2018/09/22 09:12
- Category： MELSEC-L Series
How to clear errors

Follow the procedure below.(1)Eliminate the error cause.(2) Store the error code to be cleared in SD50.(3)Turn OFF and ON SM50.(4) The error is cleared. More Details >>
- No：22613
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series

221-230 of Total 1110

Inquiries

page top