The following seven models are available for the 200 V class: 0.1K, 0.2K, 0.4K, 0.75K, 1.5K, 2.2K, and 3.7K The followin

The same EDS files cannot be used for the different models. Download the EDS files for F800 from the following page of M

It seems that calibration of the current input is slightly incorrect.By using Pr.904 (Frequency setting current bias) an

The estimated lives of the parts of the FREQROL-E500 are as follows: Cooling fan at surrounding air temperature of 35 de

For the safety of use, the wiring is recommended. If not using the wiring, set the parameter No. PA04 to “0100”.

The internal transistor of the HC2 stops by turning on the SOF signal and stopping the converter. As a result, regenerat

Connect the high power factor converter and inverter directly with a control cable, without using a relay. Since a fast-

Since the communication unit conforms to the EIA Standard RS-485, up to 32 inverters can be connected. (Transmission for

1. Wiring length between the inverter and the motor should be 500 m or less. For 0.75 kW or lower motors, the followi

The value is displayed in 0.1 rpm increments under Vector control. However, the value is rounded down to the first decim

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Drive Products

Geared Motors(88)

Geared Motors Parallel shaft type(24)
Geared Motors Right angle shaft type(26)
S-PM Geared Motors Parallel shaft type(18)
S-PM Geared Motors Right angle shaft type(20)

FAQ within [ Drive Products ]

1-10 of Total 1368

prev 1 / 137page next

Model configuration

The following seven models are available for the 200 V class: 0.1K, 0.2K, 0.4K, 0.75K, 1.5K, 2.2K, and 3.7K The following five models are available for the 4... More Details >>
- No：21621
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A024
FR-A8ND

The same EDS files cannot be used for the different models. Download the EDS files for F800 from the following page of Mitsubishi Electric FA Global Website ... More Details >>
- No：20955
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Plug-in Options
Frequency misalignment at current input

It seems that calibration of the current input is slightly incorrect.By using Pr.904 (Frequency setting current bias) and Pr.905 (Gain), you can calibrate th... More Details >>
- No：22014
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Endurance

The estimated lives of the parts of the FREQROL-E500 are as follows: Cooling fan at surrounding air temperature of 35 deg C???30,000 hrsPower supply smoothin... More Details >>
- No：22071
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-E500
Is the forced stop signal wiring necessary?

For the safety of use, the wiring is recommended. If not using the wiring, set the parameter No. PA04 to “0100”. More Details >>
- No：23645
- Release Date：2018/09/14 15:10
- Category： MELSERVO-J4
FR-HC2

The internal transistor of the HC2 stops by turning on the SOF signal and stopping the converter. As a result, regenerative driving is not performed. However... More Details >>
- No：20941
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Options
Control cable between high power factor converter and inverter

Connect the high power factor converter and inverter directly with a control cable, without using a relay. Since a fast-response is required to shut off the ... More Details >>
- No：21555
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Options
How many inverters can I connect using the communication unit?

Since the communication unit conforms to the EIA Standard RS-485, up to 32 inverters can be connected. (Transmission format: Multidrop link, total wiring len... More Details >>
- No：21616
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A024
Wire length between inverter and motor

1. Wiring length between the inverter and the motor should be 500 m or less. For 0.75 kW or lower motors, the following relationship is true: Capacity... More Details >>
- No：21392
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL
Frequency setting increment

The value is displayed in 0.1 rpm increments under Vector control. However, the value is rounded down to the first decimal place and displayed in 1 rpm incre... More Details >>
- No：21021
- Release Date：2018/08/22 16:25
- Category： FREQROL-A800

1-10 of Total 1368

Inquiries

page top