The setting memo of the parameter list seal is not provided with the FR-A500 Instruction Manual.

Possible causes are:1. The reset signal (RES) is ON. 2. The built-in CPU is not working properly due to contact faults o

Use the first contact (relay) for the forward (or reverse) rotation between the terminals STF and SD. Use the second con

Perform calculation given in the harmonic suppression guidelines, and if the limit value is exceeded, you may also need

We offer DC reactors from 0.4K and you can use it. You can use FR-BIF, FR-BSF, and FR-BEL together.

The major changes from FR-AU01 to FR-AU01A include 1. Case material and 2. Lead wire terminal process method. The FR-AU0

We have no sample program for RS485 communication. Since the communication method of the FR-SW0-SETUP uses a different p

Even when the actual load (torque) is half of the motor capacity, the current output from the inverter to the motor is n

The RS485 communication is explained in the FREQROL-E500 Instruction Manual. This Instruction Manual is published on the

"E.OV3" is displayed when the voltage between the inverter terminals PN rises abnormally high while the inverter is dece

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Drive Products

Geared Motors(88)

Geared Motors Parallel shaft type(24)
Geared Motors Right angle shaft type(26)
S-PM Geared Motors Parallel shaft type(18)
S-PM Geared Motors Right angle shaft type(20)

FAQ within [ Drive Products ]

1041-1050 of Total 1368

prev 105 / 137page next

Parameter list

The setting memo of the parameter list seal is not provided with the FR-A500 Instruction Manual. More Details >>
- No：21485
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , Others
"Err" is displayed when STF signal turns ON

Possible causes are:1. The reset signal (RES) is ON. 2. The built-in CPU is not working properly due to contact faults of the inverter parts. Check the exte... More Details >>
- No：21484
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-E500
Multi-speed operation

Use the first contact (relay) for the forward (or reverse) rotation between the terminals STF and SD. Use the second contact (relay) for the high-speed comma... More Details >>
- No：21472
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500
Countermeasure against harmonics

Perform calculation given in the harmonic suppression guidelines, and if the limit value is exceeded, you may also need to insert the ACL. Note that you cann... More Details >>
- No：21465
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , Options
Noise filter

We offer DC reactors from 0.4K and you can use it. 　You can use FR-BIF, FR-BSF, and FR-BEL together. More Details >>
- No：21461
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , Options
Difference between FR-AU01 and AU01A

The major changes from FR-AU01 to FR-AU01A include 1. Case material and 2. Lead wire terminal process method. The FR-AU01A has a backward compatibility with ... More Details >>
- No：21452
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , Options
Communication operation with FR-E500

We have no sample program for RS485 communication. Since the communication method of the FR-SW0-SETUP uses a different protocol from 485 communication and st... More Details >>
- No：21451
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-E500
Can I use a motor of which capacity is larger than the inverter capacity?

Even when the actual load (torque) is half of the motor capacity, the current output from the inverter to the motor is not reduced to the half. Therefore, it... More Details >>
- No：21442
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL
RS485 communication

The RS485 communication is explained in the FREQROL-E500 Instruction Manual. This Instruction Manual is published on the member's page of Mitsubishi Electric... More Details >>
- No：21426
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-E500
Fault display

"E.OV3" is displayed when the voltage between the inverter terminals PN rises abnormally high while the inverter is decelerating or stopped. In this case, th... More Details >>
- No：21411
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A024

1041-1050 of Total 1368

Inquiries

page top