It seems that calibration of the current input is slightly incorrect.By using Pr.904 (Frequency setting current bias) an

When all of the multi-speed input signals are turned OFF during external operation, the output frequency conforms to the

The inverter's power supply capacity can be calculated using the following equation:Power supply capacity [kVA] = Motor

When the inverter's forward and reverse terminals are switched instantaneously, the inverter decelerates and then switch

Set Pr.9 to the rated current at 50 Hz or a value 1.1 times as the rated current at 60 Hz.You can specify the motor type

A reference sine wave signal is generated inside the high power factor converter, and transistors are configured and PWM

Since the input power factor is improved to approximately 1, the power supply capacity can be reduced to 2/3 to 3/4 of a

An inverter with one-rank higher capacity is often used when a high torque is required for a short period of time. (Exam

Since the heat sink and fan are not waterproof, you need to enclose them so that they are not exposed to the spray of wa

The following surrounding environment is common to all models. Surrounding air temperature: No problem. The inverters ca

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Drive Products

Geared Motors(88)

Geared Motors Parallel shaft type(24)
Geared Motors Right angle shaft type(26)
S-PM Geared Motors Parallel shaft type(18)
S-PM Geared Motors Right angle shaft type(20)

FAQ within [ Drive Products ]

1311-1320 of Total 1368

prev 132 / 137page next

Frequency misalignment at current input

It seems that calibration of the current input is slightly incorrect.By using Pr.904 (Frequency setting current bias) and Pr.905 (Gain), you can calibrate th... More Details >>
- No：22014
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
External frequency selection

When all of the multi-speed input signals are turned OFF during external operation, the output frequency conforms to the external analog frequency command (i... More Details >>
- No：22012
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Consideration on power supply capacity

The inverter's power supply capacity can be calculated using the following equation:Power supply capacity [kVA] = Motor output (kW)/(Motor efficiency × Inver... More Details >>
- No：22000
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Reversible operation of agitator

When the inverter's forward and reverse terminals are switched instantaneously, the inverter decelerates and then switches the rotation direction. It can swi... More Details >>
- No：21999
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Electronic thermal O/L relay setting

Set Pr.9 to the rated current at 50 Hz or a value 1.1 times as the rated current at 60 Hz.You can specify the motor type with Pr.71 (Applied motor). For a co... More Details >>
- No：21941
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Waveform improvement

A reference sine wave signal is generated inside the high power factor converter, and transistors are configured and PWM switching is performed in the conver... More Details >>
- No：21574
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Options
Power supply capacity

Since the input power factor is improved to approximately 1, the power supply capacity can be reduced to 2/3 to 3/4 of an inverter without a power factor imp... More Details >>
- No：21556
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Options
Inverter with one-rank higher capacity

An inverter with one-rank higher capacity is often used when a high torque is required for a short period of time. (Examples)- When rapid acceleration/decele... More Details >>
- No：21456
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL
FR-A5CN03

Since the heat sink and fan are not waterproof, you need to enclose them so that they are not exposed to the spray of water. If you use the inverter (heat si... More Details >>
- No：21433
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL
The operating environment of FA products

The following surrounding environment is common to all models. Surrounding air temperature: No problem. The inverters can be used in -10 to 50°C. Above sea l... More Details >>
- No：21386
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL

1311-1320 of Total 1368

Inquiries

page top