Set Pr.550 (NET mode operation command source selection) to "2" (PU connector is the command source).When operating the

1. It is OK to open MC on the output side while the inverter is operating.2. It is OK to open the input side in case of

The inverter's power supply capacity can be calculated using the following equation:Power supply capacity [kVA] = Motor

You cannot use the FR-PU04 with the FR-HC.

Many geared motors cannot continuously operate at low speed (for example, slower than 6 Hz) due to grease viscosity.If t

If you ground the common terminals of the control circuit, it is connected with the inverter's earthing and the inverter

Already released.Unlike the E520, you need to purchase the optional card FR-E5NC.

It is 2 to 3 ms, same as the FR-A800.

Only the V/F control is related with Pr.56. The motor torque is calculated from the current value (not Pr.56) and motor

It is available if the CC-Link option of the FR-A8NC is installed.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Drive Products

Geared Motors(86)

Geared Motors Parallel shaft type(23)
Geared Motors Right angle shaft type(25)
S-PM Geared Motors Parallel shaft type(18)
S-PM Geared Motors Right angle shaft type(20)

FAQ within [ Drive Products ]

221-230 of Total 1353

prev 23 / 136page next

CC-Link

Set Pr.550 (NET mode operation command source selection) to "2" (PU connector is the command source).When operating the inverter using the USB connector, set... More Details >>
- No：21904
- Release Date：2018/08/22 16:30
- Category： FREQROL-E700
Power supply ON/OFF

1. It is OK to open MC on the output side while the inverter is operating.2. It is OK to open the input side in case of emergency stop. More Details >>
- No：21972
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Consideration on power supply capacity

The inverter's power supply capacity can be calculated using the following equation:Power supply capacity [kVA] = Motor output (kW)/(Motor efficiency × Inver... More Details >>
- No：22000
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Availability of parameter unit

You cannot use the FR-PU04 with the FR-HC. More Details >>
- No：22005
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Options
Speed control range

Many geared motors cannot continuously operate at low speed (for example, slower than 6 Hz) due to grease viscosity.If the motor you are using is of this typ... More Details >>
- No：22028
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A024
Common terminals of control circuit

If you ground the common terminals of the control circuit, it is connected with the inverter's earthing and the inverter's noise may be input to the control ... More Details >>
- No：22037
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
CC-Link

Already released.Unlike the E520, you need to purchase the optional card FR-E5NC. More Details >>
- No：22050
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-E500
FR-F800

It is 2 to 3 ms, same as the FR-A800. More Details >>
- No：20819
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL
Load characteristics fault detection

Only the V/F control is related with Pr.56. The motor torque is calculated from the current value (not Pr.56) and motor constant. For the V/F control, it is ... More Details >>
- No：20893
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-F800
FR-A800-E

It is available if the CC-Link option of the FR-A8NC is installed. More Details >>
- No：20894
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800

221-230 of Total 1353

Inquiries

page top