The inverter restart operation is disabled at turn-OFF of the CS signal while a value other than "9999" (with restart) i

Perform calculation given in the harmonic suppression guidelines, and if the limit value is exceeded, you may also need

1. You cannot use the inverter in an environment where it is exposed to oil mist. You need to enclose the inverter in a

The internal processing speed is not published. The analog input specifications are as follows: FR-A500???1/4000FR-E500?

Up to 50 m. Be sure to connect the encoder cables in parallel and use the thicker cable gauge. You can extend this dista

The operation command source is automatically transferred to the connected FR-PU07 or FR-PA07.

Set Pr.9, Pr.71, Pr.80, Pr.81, Pr.83, Pr.84, and Pr.96.

You can use optional items, such as enclosure surface operation panel FR-PA07 and parameter unit FR-PU07.Use the PU conn

If Pr.340 (Communication startup mode selection) and Pr.79 (Operation mode selection) are set so that the inverter start

We support the primary diagnosis of products and arrangements of spare parts. We do not provide product training or repa

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Drive Products

Geared Motors(86)

Geared Motors Parallel shaft type(23)
Geared Motors Right angle shaft type(25)
S-PM Geared Motors Parallel shaft type(18)
S-PM Geared Motors Right angle shaft type(20)

FAQ within [ Drive Products ]

291-300 of Total 1353

prev 30 / 136page next

Automatic restart after instantaneous power failure

The inverter restart operation is disabled at turn-OFF of the CS signal while a value other than "9999" (with restart) is set in Pr.57. The terminals CS and ... More Details >>
- No：21255
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
Countermeasure against harmonics

Perform calculation given in the harmonic suppression guidelines, and if the limit value is exceeded, you may also need to insert the ACL. Note that you cann... More Details >>
- No：21465
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , Options
Countermeasure against oil mist

1. You cannot use the inverter in an environment where it is exposed to oil mist. 　You need to enclose the inverter in an enclosure and then install the encl... More Details >>
- No：21538
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A500
Analog signal resolution

The internal processing speed is not published. The analog input specifications are as follows: FR-A500???1/4000FR-E500???1/1000MR-H???1/4000 More Details >>
- No：21550
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-E500
Motor wiring length

Up to 50 m. Be sure to connect the encoder cables in parallel and use the thicker cable gauge. You can extend this distance up to 100 m by using the long dis... More Details >>
- No：21641
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-V200
FR-PA07

The operation command source is automatically transferred to the connected FR-PU07 or FR-PA07. More Details >>
- No：21700
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-F700PJ
Parameter setting

Set Pr.9, Pr.71, Pr.80, Pr.81, Pr.83, Pr.84, and Pr.96.　　 More Details >>
- No：21721
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700
CC-Link

You can use optional items, such as enclosure surface operation panel FR-PA07 and parameter unit FR-PU07.Use the PU connector of the inverter for connection.... More Details >>
- No：21832
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
CC-Link

If Pr.340 (Communication startup mode selection) and Pr.79 (Operation mode selection) are set so that the inverter starts CC-Link operation from power-on and... More Details >>
- No：21840
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
Overseas support

We support the primary diagnosis of products and arrangements of spare parts. We do not provide product training or repair support. More Details >>
- No：20783
- Release Date：2018/08/21 16:10
- Update：2018/09/03 14:09
- Category： Geared Motors Parallel shaft type , Geared Motors Right angle shaft type , S-PM Geared Motors Parallel shaft type , S-PM Geared Motors Right angle shaft type

291-300 of Total 1353

Inquiries

page top