The number of terminals: There are the same output terminals as F700P and the following terminals (2 points) are added.

Up to 20 pieces of sampling data can be saved. The oldest data is overwritten when more than 20 pieces of data are to be

The frequency setting in the communication cannot be used together with FR-A8AX. The priority of the FR-A8AX is equal to

It is available if the CC-Link option of the FR-A8NC is installed.

The key size to be inserted into the hollow geared motor should be nearly twice the length of the hollow shaft hole diam

18 bits (262,144 pulses/rev.) The encoder resolution of HG series servo motor in J4 mode is 22 bits (4,194,304 pulses/re

When using the setting dial to set the frequency, turn the dial and press the "SET" key while the desired value flickers

Check the setting value of Pr.73. Or check Pr.C4 (Terminal 2 frequency setting gain) for the percentage of the voltage t

If you ground the common terminals of the control circuit, it is connected with the inverter's earthing and the inverter

When the command frequency is 0 Hz, the inverter does not generate output and the voltage is 0 V.

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Drive Products

Geared Motors(86)

Geared Motors Parallel shaft type(23)
Geared Motors Right angle shaft type(25)
S-PM Geared Motors Parallel shaft type(18)
S-PM Geared Motors Right angle shaft type(20)

FAQ within [ Drive Products ]

331-340 of Total 1353

prev 34 / 136page next

The number of output terminals

The number of terminals: There are the same output terminals as F700P and the following terminals (2 points) are added. Safety: SO, SOC *The terminals SO and... More Details >>
- No：21069
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-F800
FR Configurator2

Up to 20 pieces of sampling data can be saved. The oldest data is overwritten when more than 20 pieces of data are to be saved. More Details >>
- No：20991
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Engineering Software
FR-A8NC/FR-A8AX

The frequency setting in the communication cannot be used together with FR-A8AX. The priority of the FR-A8AX is equal to the second terminal analog input and... More Details >>
- No：20917
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Plug-in Options
FR-A800-E

It is available if the CC-Link option of the FR-A8NC is installed. More Details >>
- No：20894
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800
Regarding the length of the key to be inserted in the hollow shaft of right angle shaft type.

The key size to be inserted into the hollow geared motor should be nearly twice the length of the hollow shaft hole diameter. In the case of the GM-SSY wi... More Details >>
- No：20761
- Release Date：2018/08/21 16:10
- Update：2018/09/05 15:50
- Category： Geared Motors Right angle shaft type , S-PM Geared Motors Right angle shaft type
Encoder resolution during J3 compatibility mode

18 bits (262,144 pulses/rev.) The encoder resolution of HG series servo motor in J4 mode is 22 bits (4,194,304 pulses/rev). For details of J3 compatibility m... More Details >>
- No：23630
- Release Date：2018/09/14 15:10
- Category： MELSERVO-J4 , MELSERVO-JE
RUN blinks

When using the setting dial to set the frequency, turn the dial and press the "SET" key while the desired value flickers. (The value and "F" flicker alternat... More Details >>
- No：21692
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P , FREQROL-F700PJ
Analog voltage

Check the setting value of Pr.73. Or check Pr.C4 (Terminal 2 frequency setting gain) for the percentage of the voltage that is actually applied. For the FR-E... More Details >>
- No：21356
- Release Date：2018/08/22 16:27
- Category： FREQROL-E700
Common terminals of control circuit

If you ground the common terminals of the control circuit, it is connected with the inverter's earthing and the inverter's noise may be input to the control ... More Details >>
- No：22037
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
0 Hz output of inverter

When the command frequency is 0 Hz, the inverter does not generate output and the voltage is 0 V. More Details >>
- No：22011
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL

331-340 of Total 1353

Inquiries

page top