1. Not all items can be controlled. - Functions that cannot be controlled JOG, AU, CS, OH, X10, X11, X12, and X16 func

1. Since you can monitor the output frequency independently, you do not need to switch monitoring by the monitor command

Number of terminals: Same input terminals as the A700 series, and the following two terminals are added. Safety: SI1, SI

The sine wave filter can be applied only under V/F control. When Pr.72 PWM frequency selection is set to 25, V/F control

The English version of SW3 can be installed with the product ID of FR Configurator2 if it is Ver.5.50 or later. Since Ve

20 ms or less is required to switch the control with the MC signal.

Our suggestion is to adjust the following parameters:1. Set Pr.14 = 0. If the V/F pattern for variable-torque load (Pr.1

When the FR-PA02 is connected to the inverter with a cable, the FR-PA02 becomes effective.The operation panel of the inv

If Pr.544 (CC-Link extended setting) is set to other than "0", you do not need to change Pr.544 (CC-Link extended settin

If you have already set other parameters necessary for tuning (Pr.9, Pr.71, Pr.80, Pr.81, Pr.83, and Pr.84), press the M

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Drive Products

Geared Motors(86)

Geared Motors Parallel shaft type(23)
Geared Motors Right angle shaft type(25)
S-PM Geared Motors Parallel shaft type(18)
S-PM Geared Motors Right angle shaft type(20)

FAQ within [ Drive Products ]

481-490 of Total 1353

prev 49 / 136page next

Items controllable via CC-Link

1. Not all items can be controlled. 　　- Functions that cannot be controlled JOG, AU, CS, OH, X10, X11, X12, and X16 functions (Other functions can be control... More Details >>
- No：21459
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-E500
CC-Link monitor and parameter setting

1. Since you can monitor the output frequency independently, you do not need to switch monitoring by the monitor commands. Assign the remote register RWr0 to... More Details >>
- No：21418
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-E500
FR-A800

Number of terminals: Same input terminals as the A700 series, and the following two terminals are added. Safety: SI1, SI2, SIC 24 V power supply: +24 * The t... More Details >>
- No：21099
- Release Date：2018/08/22 16:25
- Category： FREQROL-A800
Sine wave filter

The sine wave filter can be applied only under V/F control. When Pr.72 PWM frequency selection is set to 25, V/F control is set automatically. The applicable... More Details >>
- No：21068
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Options , FREQROL-A800 , FREQROL-A700
FR Configurator2

The English version of SW3 can be installed with the product ID of FR Configurator2 if it is Ver.5.50 or later. Since Ver.5.50 or former does not have a prod... More Details >>
- No：20913
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Engineering Software
Switching time of the FR-A800 control

20 ms or less is required to switch the control with the MC signal. More Details >>
- No：20838
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800
Frequency does not rise with blower

Our suggestion is to adjust the following parameters:1. Set Pr.14 = 0. If the V/F pattern for variable-torque load (Pr.14 = 1) is used, the current may incre... More Details >>
- No：22060
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-F500
Setting dial and FR-PA02 built-in potentiometer

When the FR-PA02 is connected to the inverter with a cable, the FR-PA02 becomes effective.The operation panel of the inverter can also be used to set some pa... More Details >>
- No：21861
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-F700PJ
CC-Link

If Pr.544 (CC-Link extended setting) is set to other than "0", you do not need to change Pr.544 (CC-Link extended setting).Write the extended setting of the ... More Details >>
- No：21834
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
Auto tuning

If you have already set other parameters necessary for tuning (Pr.9, Pr.71, Pr.80, Pr.81, Pr.83, and Pr.84), press the MODE button to return to the frequency... More Details >>
- No：21750
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700

481-490 of Total 1353

Inquiries

page top