The following are added to the multi-function product in addition to the standard product: - Input terminal function sel

You cannot use it with the standard and multi-function products. It can be connected to the dedicated PU operation type

The key sheet fixed to the inverter is used for operation. Therefore, the conventional parameter unit cannot be used. (T

The following is the amount of heat generated for each capacity:0.1K: 14W 0.2K: 20W 0.4K: 32W 0.75K: 50W1.5K: 80W 2.

Check if Pr.13 (Starting frequency) is set to higher than 10 Hz.Also check if a signal is input through the terminal MRS

Install the DIN rail attachment to each inverter.The optional FR-A7NC is built in the inverter and does not influence in

Checking terminals used:Are the terminals MRS and RES open?Are the terminals STR and SD short-circuited correctly?Is the

Yes.By using both types of reactors together, you can reduce the outgoing harmonic current.For examples of harmonics red

If you ground the common terminals of the control circuit, it is connected with the inverter's earthing and the inverter

1. To perform emergency stop, it is recommended to have the motor coast and stop it using a mechanical brake.In this cas

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Drive Products

Geared Motors(88)

Geared Motors Parallel shaft type(24)
Geared Motors Right angle shaft type(26)
S-PM Geared Motors Parallel shaft type(18)
S-PM Geared Motors Right angle shaft type(20)

FAQ within [ Drive Products ]

511-520 of Total 1368

prev 52 / 137page next

Difference between multi-function and standard products

The following are added to the multi-function product in addition to the standard product: - Input terminal function selection (X1 to X3)- Warning NO contact... More Details >>
- No：21592
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-U100
Can I use digital operation panel FR-DU01?

You cannot use it with the standard and multi-function products. It can be connected to the dedicated PU operation type only. (Note that the FR-DU01 is an op... More Details >>
- No：21595
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-U100
Are conventional parameter units still available?

The key sheet fixed to the inverter is used for operation. Therefore, the conventional parameter unit cannot be used. (There is no connector to connect it.)O... More Details >>
- No：21597
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-U100
FR-E720

The following is the amount of heat generated for each capacity:0.1K: 14W　　0.2K: 20W　　0.4K: 32W　　0.75K: 50W1.5K: 80W　　2.2K: 100W　　3.7K: 160W　　5.5K: 290W7.5K:... More Details >>
- No：21706
- Release Date：2018/08/22 16:29
- Category： FREQROL-E700
Parameter setting

Check if Pr.13 (Starting frequency) is set to higher than 10 Hz.Also check if a signal is input through the terminal MRS. More Details >>
- No：21722
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-F700PJ
FR-E700

Install the DIN rail attachment to each inverter.The optional FR-A7NC is built in the inverter and does not influence installation of the inverter. More Details >>
- No：21884
- Release Date：2018/08/22 16:29
- Category： FREQROL-E700
External 0 to 10 VDC input

Checking terminals used:Are the terminals MRS and RES open?Are the terminals STR and SD short-circuited correctly?Is the voltage/current switch of the termin... More Details >>
- No：21916
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-F700PJ
Using both types of power factor improving reactors

Yes.By using both types of reactors together, you can reduce the outgoing harmonic current.For examples of harmonics reduction, refer to the value in the har... More Details >>
- No：21995
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Options
Common terminals of control circuit

If you ground the common terminals of the control circuit, it is connected with the inverter's earthing and the inverter's noise may be input to the control ... More Details >>
- No：22037
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Inverter general matters

1. To perform emergency stop, it is recommended to have the motor coast and stop it using a mechanical brake.In this case, the output stop (MRS) signal is in... More Details >>
- No：22103
- Release Date：2018/08/22 16:31
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-E500

511-520 of Total 1368

Inquiries

page top