The speed fluctuation ratio under Advanced magnetic flux vector control of the FR-A500 is as follows. Without encoder: ±

The major changes from FR-AU01 to FR-AU01A include 1. Case material and 2. Lead wire terminal process method. The FR-AU0

The FR-E500 manufactured before May 1998 behaved as you mentioned, and the potentiometer becomes unavailable once you se

When an instantaneous power failure of 100 msec or longer occurs, the inverter is reset* and it is not recognized as a f

For the 200 V class, the 7.5K, 15K, 30K, and 55K models are available. For the 400 V class, the 7.5K, 15K, 30K, and 55K

You can vary the carrier frequency within the range of 0.7 to 14.5 kHz, and it is initially set to 1 kHz that generates

When running the inverter in Advanced magnetic flux vector control, the frequency setting value is increased by the amou

Yes.By using both types of reactors together, you can reduce the outgoing harmonic current.For examples of harmonics red

When you are inputting analog signals, install the potentiometer within 30 m from the inverter. (Refer to "Precaution o

Square wave input is not recommended since it can cause failures (for example, damage the diode bridge).

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Drive Products

Geared Motors(86)

Geared Motors Parallel shaft type(23)
Geared Motors Right angle shaft type(25)
S-PM Geared Motors Parallel shaft type(18)
S-PM Geared Motors Right angle shaft type(20)

FAQ within [ Drive Products ]

571-580 of Total 1353

prev 58 / 136page next

Vector control of the inverter

The speed fluctuation ratio under Advanced magnetic flux vector control of the FR-A500 is as follows. Without encoder: ±1% With encoder (with A5AP): ±0. 02 %... More Details >>
- No：21369
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500
Difference between FR-AU01 and AU01A

The major changes from FR-AU01 to FR-AU01A include 1. Case material and 2. Lead wire terminal process method. The FR-AU01A has a backward compatibility with ... More Details >>
- No：21452
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , Options
FR-E520 operation mode (Pr.79) selection

The FR-E500 manufactured before May 1998 behaved as you mentioned, and the potentiometer becomes unavailable once you set the frequency on the operation pane... More Details >>
- No：21525
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-E500
Faults history upon power failure

When an instantaneous power failure of 100 msec or longer occurs, the inverter is reset* and it is not recognized as a fault. Since it is not recognized as a... More Details >>
- No：21551
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A500
Model configuration

For the 200 V class, the 7.5K, 15K, 30K, and 55K models are available. For the 400 V class, the 7.5K, 15K, 30K, and 55K models are available. Each requires t... More Details >>
- No：21576
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Options
Range of carrier frequency

You can vary the carrier frequency within the range of 0.7 to 14.5 kHz, and it is initially set to 1 kHz that generates low noise and leakage current. You ca... More Details >>
- No：21607
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A024
Frequency setting

When running the inverter in Advanced magnetic flux vector control, the frequency setting value is increased by the amount of the motor's slippage, resulting... More Details >>
- No：21801
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700
Using both types of power factor improving reactors

Yes.By using both types of reactors together, you can reduce the outgoing harmonic current.For examples of harmonics reduction, refer to the value in the har... More Details >>
- No：21995
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Options
Installing frequency setting potentiometer

When you are inputting analog signals, install the potentiometer within 30 m from the inverter. 　(Refer to "Precaution on Selection and Operation" on the cat... More Details >>
- No：22051
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Inverter input power supply

Square wave input is not recommended since it can cause failures (for example, damage the diode bridge). More Details >>
- No：22106
- Release Date：2018/08/22 16:31
- Category： Inverters-FREQROL , FREQROL-E500

571-580 of Total 1353

Inquiries

page top