No, they do not. Pr.72 is invalid at the offline auto tuning. It is also invalid when the motor rotates with Pr.96 = 101

It does not change even when General-purpose magnetic flux vector control is performed. Pr.3 is the inflection point of

These parameters are used for the communication compatible with the communication protocol of the Ethernet IP of the HMS

You can solder the wiring to the connector without using the junction terminal block (option).

Check if the communication setting parameters (Pr.117 to Pr.124) are set to the same values between the inverter and per

1. The braking torque can be considered 50% of the motor rated torque.2. The largest stress the DC injection brake gives

The filtering effect is higher as the cable is wound more.However, if the cable is wound more than 4T on the inverter ou

Connecting the brake resistor allows for quick deceleration because the regenerative power is processed. (The brake torq

Many geared motors cannot continuously operate at low speed (for example, slower than 6 Hz) due to grease viscosity.If t

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Drive Products

Geared Motors(88)

Geared Motors Parallel shaft type(24)
Geared Motors Right angle shaft type(26)
S-PM Geared Motors Parallel shaft type(18)
S-PM Geared Motors Right angle shaft type(20)

FAQ within [ Drive Products ]

571-580 of Total 1368

prev 58 / 137page next

FR-A800

No, they do not. Pr.72 is invalid at the offline auto tuning. It is also invalid when the motor rotates with Pr.96 = 101. More Details >>
- No：20878
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800 , FREQROL-F800
S-shape acceleration/deceleration of the FR-D700

It does not change even when General-purpose magnetic flux vector control is performed. Pr.3 is the inflection point of the S-shape. More Details >>
- No：20834
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-D700
FR-A800 "Parameter for the communication setting"

These parameters are used for the communication compatible with the communication protocol of the Ethernet IP of the HMS optional circuit board (A8NEIP_2P). More Details >>
- No：20824
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800
Wiring to connector

You can solder the wiring to the connector without using the junction terminal block (option). More Details >>
- No：23653
- Release Date：2018/09/14 15:10
- Category： MELSERVO-JN
Replacement of MR-BAT6V1SET

No More Details >>
- No：23649
- Release Date：2018/09/14 15:10
- Category： MELSERVO-J4
Inverter communication

Check if the communication setting parameters (Pr.117 to Pr.124) are set to the same values between the inverter and personal computer.Note that communicatio... More Details >>
- No：22105
- Release Date：2018/08/22 16:31
- Category： Inverters-FREQROL , FREQROL-A500
DC injection brake

1. The braking torque can be considered 50% of the motor rated torque.2. The largest stress the DC injection brake gives to the motor is the motor heat gener... More Details >>
- No：22088
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
FR-BSF01 wiring

The filtering effect is higher as the cable is wound more.However, if the cable is wound more than 4T on the inverter output side, since the inverter's outpu... More Details >>
- No：22064
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Options
Brake resistor

Connecting the brake resistor allows for quick deceleration because the regenerative power is processed. (The brake torque increases.)Therefore, when an exte... More Details >>
- No：22045
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500 , FREQROL-E500
Speed control range

Many geared motors cannot continuously operate at low speed (for example, slower than 6 Hz) due to grease viscosity.If the motor you are using is of this typ... More Details >>
- No：22028
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A024

571-580 of Total 1368

Inquiries

page top