Please refer to the section "Terminal box installation location and direction of lead wire outlet" of the general catalo

Refer to the Technical Sheet No.23 (Capacity Selection and Continuous Operation) for reference for selection. Optional c

1. If the start signal is present when the power and communication restore, the inverter starts operation. 2. Similarly

General-purpose magnetic flux vector control is effective at low speed under a heavy load.To shorten the acceleration ti

The operation panel of the FR-S500 is not detachable.For the FR-S500-○○K-R (compatible with RS-485 communication), you c

When using one-rank-higher inverter, as you mention, you need to care about the setting of the electronic thermal O/L re

Since the UL standard defines to "Use copper wires (rated at 75?C)", we also recommend the same type of copper wire.

Yes.By using both types of reactors together, you can reduce the outgoing harmonic current.For examples of harmonics red

The motor-generated torque elements have the following relationship:Torque T = K I V/FK: ConstantI: CurrentV: VoltageF:

Yes. Set Pr.79 = 3. (Input the start signal from an external source.)

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Drive Products

Geared Motors(86)

Geared Motors Parallel shaft type(23)
Geared Motors Right angle shaft type(25)
S-PM Geared Motors Parallel shaft type(18)
S-PM Geared Motors Right angle shaft type(20)

FAQ within [ Drive Products ]

581-590 of Total 1353

prev 59 / 136page next

About changing the direction of the cable entrance for the terminal box

Please refer to the section "Terminal box installation location and direction of lead wire outlet" of the general catalogue. However, GM-J2 series is not su... More Details >>
- No：20763
- Release Date：2018/08/21 16:10
- Update：2018/09/04 15:06
- Category： Geared Motors Parallel shaft type , Geared Motors Right angle shaft type , S-PM Geared Motors Parallel shaft type , S-PM Geared Motors Right angle shaft type
Calculation of inverter acceleration and deceleration time

Refer to the Technical Sheet No.23 (Capacity Selection and Continuous Operation) for reference for selection. Optional capacity selection software is also pr... More Details >>
- No：22097
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Instantaneous power failure of facilities

1. If the start signal is present when the power and communication restore, the inverter starts operation. 2. Similarly to the above, if the start signal is ... More Details >>
- No：22093
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-E500
Parameter setting for FR-E500

General-purpose magnetic flux vector control is effective at low speed under a heavy load.To shorten the acceleration time, use Pr.44 to set the second accel... More Details >>
- No：22059
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-E500
Separation of operation panel

The operation panel of the FR-S500 is not detachable.For the FR-S500-○○K-R (compatible with RS-485 communication), you can install the FR-PU04 on the enclosu... More Details >>
- No：22058
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-S500
Notes when inverter capacity is larger than motor capacity

When using one-rank-higher inverter, as you mention, you need to care about the setting of the electronic thermal O/L relay.Setting the electronic thermal O/... More Details >>
- No：22040
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-E500
FR-A500 main circuit wire types

Since the UL standard defines to "Use copper wires (rated at 75?C)", we also recommend the same type of copper wire. More Details >>
- No：22032
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Using both types of power factor improving reactors

Yes.By using both types of reactors together, you can reduce the outgoing harmonic current.For examples of harmonics reduction, refer to the value in the har... More Details >>
- No：21995
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Options
Current value display

The motor-generated torque elements have the following relationship:Torque T = K I V/FK: ConstantI: CurrentV: VoltageF: FrequencyThe inverter regularly perfo... More Details >>
- No：21952
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Using built-in potentiometer and multi-speed together

Yes. Set Pr.79 = 3. (Input the start signal from an external source.) More Details >>
- No：21950
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-E500

581-590 of Total 1353

Inquiries

page top