Since the dedicated motor is designed with the rated voltage of approximately 320 V, it can produce sufficient torque fo

When you use a long wire between the inverter and motor, pay attention to the following: 1. Since the voltage supplied t

We have no sample program for RS485 communication. Since the communication method of the FR-SW0-SETUP uses a different p

Since the stall prevention function works during acceleration and the inverter does not reach the commanded speed, set P

Similarly to the FR-A200 and A500, four or more filters should be used also for the FR-A100. In short, it is OK if the

I use the dedicated motor SF-VR with the same capacity as the inverter. 1. Load fluctuationSpeed fluctuation ratio with

The carrier frequency is initially set to 7 kHz. (When Pr.10 is set to "---", you can set or change the setting using Pr

This parameter unit realizes both easy operation and advanced operation. In normal operation, you only need to use six k

You can operate it by adjusting the motor constant by the auto tuning function. (Note that the same characteristics as o

You cannot reuse the parameter unit (FR-PU01) for the FREQROL-Z series, the parameter unit (FR-PU02) for the FREQROL-A20

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Drive Products

Geared Motors(86)

Geared Motors Parallel shaft type(23)
Geared Motors Right angle shaft type(25)
S-PM Geared Motors Parallel shaft type(18)
S-PM Geared Motors Right angle shaft type(20)

FAQ within [ Drive Products ]

651-660 of Total 1353

prev 66 / 136page next

Motor characteristics at low input voltage

Since the dedicated motor is designed with the rated voltage of approximately 320 V, it can produce sufficient torque for the input voltage of 380 V. Therefo... More Details >>
- No：21434
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-V200
Long motor wiring

When you use a long wire between the inverter and motor, pay attention to the following: 1. Since the voltage supplied to the motor terminal is reduced due t... More Details >>
- No：21441
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500
Communication operation with FR-E500

We have no sample program for RS485 communication. Since the communication method of the FR-SW0-SETUP uses a different protocol from 485 communication and st... More Details >>
- No：21451
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-E500
Stall mode

Since the stall prevention function works during acceleration and the inverter does not reach the commanded speed, set Pr.156 (Stall prevention operation sel... More Details >>
- No：21460
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-A500
Difference between use with A100 and other types

Similarly to the FR-A200 and A500, four or more filters should be used also for the FR-A100. 　In short, it is OK if the wire penetrates the filter four times... More Details >>
- No：21468
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , Options
Speed fluctuation

I use the dedicated motor SF-VR with the same capacity as the inverter. 1. Load fluctuationSpeed fluctuation ratio with the load fluctuation 0 to 100% is:Wit... More Details >>
- No：21490
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , FREQROL-V200
Carrier frequency of low-noise series

The carrier frequency is initially set to 7 kHz. (When Pr.10 is set to "---", you can set or change the setting using Pr.72.) Raising the carrier frequency r... More Details >>
- No：21600
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-U100
Features of parameter unit FR-PU03

This parameter unit realizes both easy operation and advanced operation. In normal operation, you only need to use six keys for easy operation. To perform ad... More Details >>
- No：21614
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A024
Use of general-purpose servo motor

You can operate it by adjusting the motor constant by the auto tuning function. (Note that the same characteristics as operated by the servo amplifier MR-VA ... More Details >>
- No：21652
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-V200
Reusing parameter units

You cannot reuse the parameter unit (FR-PU01) for the FREQROL-Z series, the parameter unit (FR-PU02) for the FREQROL-A200 and A100 series, and the parameter ... More Details >>
- No：21654
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Others , FREQROL-V200

651-660 of Total 1353

Inquiries

page top