Difference from conventional product (parameter unit)

The parameter unit is not available. Use two internal potentiometers to set the electronic thermal O/L relay and acceleration/deceleration time, and two swit... More Details >>

Can I input speed setting externally with the box type?

No. Use the potentiometer on the box to set the speed. If you want to input analog values externally to set the speed, use the unit (module) type. More Details >>

Input power factor

To almost "1". (With load factor of 100%) More Details >>

Countermeasure against the fault occurrence

When a CC-Link communication fault occurs, the option error (OP3) occurs on the inverter and the output is shut off, and the motor starts coasting. When usin... More Details >>

Countermeasure against inverter noise

You can attach the following filters to the inverter input side:- Line noise filter (FR-BLF, FR-BSF01)- Radio noise filter (FR-BIF) 　While it is a good idea ... More Details >>

CC-Link

Although you specify the FR-V200 and others as the inverter models, CC-Link is currently supported by the FR-A500 and FR-E500. The FR-V200E does not support ... More Details >>

Energy saving and power supply capacity of inverter

Energy saving is achieved by switching from the commercial power supply to the inverter to operate the motor. When the inverter reduces motor speed, it also... More Details >>

Simple torque control using stall prevention function

Basically, torque control cannot be performed. Instead, control speed to adjust the winding torque. It is possible to use the current limit function to preve... More Details >>

FR-A5CN

When the heat sink is outside, since the heat sink and fan are not waterproof, you need to enclose them so that they are not exposed to the spray of water. More Details >>

FR Configurator SW3 (CC-Link Seamless)

It is supports FR Configurator Ver.4.90 or later. More Details >>