By using the reactors 1 and 2 as well as the outside box supplied with the high power factor converter, while the noise

Harmonics cannot be suppressed (controlled) correctly and noise cannot be removed. Be sure to connect the supplied react

Connect the high power factor converter and inverter directly with a control cable, without using a relay. Since a fast-

This error is displayed when the inverter and operation panel FR-PU04 cannot communicate with each other correctly or th

To connect the operation panel to the enclosure, use the parameter unit connection cable FR-CB201, FR-CB203, or FR-CB205

No load current for each power supply voltage is as follows:- Approximately 15.5 A for 200 VAC 60 Hz- Approximately 21.7

Pr.168 indicates the inverter software version.Pr.169 indicates the inverter software subversion history. These two para

This can occur if the parameter unit window display is set to "Frequency setting value". If the screen display selection

The inverter (FR-A520-5.5K) itself generates approximately 310 W of heat. This is the amount generated under the inverte

We do not offer a sample program for the programmable controller. Refer to the Instruction Manual and create the program

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Drive Products

Geared Motors(88)

Geared Motors Parallel shaft type(24)
Geared Motors Right angle shaft type(26)
S-PM Geared Motors Parallel shaft type(18)
S-PM Geared Motors Right angle shaft type(20)

FAQ within [ Drive Products ]

851-860 of Total 1368

prev 86 / 137page next

Influence on noise level

By using the reactors 1 and 2 as well as the outside box supplied with the high power factor converter, while the noise may increase or decrease depending th... More Details >>
- No：21559
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Options
What happens if the supplied reactor and outside box are not used?

Harmonics cannot be suppressed (controlled) correctly and noise cannot be removed. Be sure to connect the supplied reactor and outside box to the inverter. More Details >>
- No：21557
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Options
Control cable between high power factor converter and inverter

Connect the high power factor converter and inverter directly with a control cable, without using a relay. Since a fast-response is required to shut off the ... More Details >>
- No：21555
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Options
"Err" displayed at power-ON

This error is displayed when the inverter and operation panel FR-PU04 cannot communicate with each other correctly or the reset signal remains ON. Therefore,... More Details >>
- No：21546
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A500
Connecting operation panel to enclosure

To connect the operation panel to the enclosure, use the parameter unit connection cable FR-CB201, FR-CB203, or FR-CB205. The maximum cable length is 5 m. No... More Details >>
- No：21542
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-E500
No load current value of motor

No load current for each power supply voltage is as follows:- Approximately 15.5 A for 200 VAC 60 Hz- Approximately 21.7 A for 220 VAC 60 HzThe current is es... More Details >>
- No：21534
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Others
Parameters not covered in manual are displayed

Pr.168 indicates the inverter software version.Pr.169 indicates the inverter software subversion history. These two parameters are only used by the manufactu... More Details >>
- No：21532
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-E500
Frequency monitor display fault

This can occur if the parameter unit window display is set to "Frequency setting value". If the screen display selection (first monitored window) is set to "... More Details >>
- No：21526
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A200
Amount of heat

The inverter (FR-A520-5.5K) itself generates approximately 310 W of heat. This is the amount generated under the inverter rated current 100% load. Since the ... More Details >>
- No：21523
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A500
Do you have a sample program for 485 communication?

We do not offer a sample program for the programmable controller. Refer to the Instruction Manual and create the program by yourself. More Details >>
- No：21522
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , Others , FREQROL-E500

851-860 of Total 1368

Inquiries

page top