Reverse operation is enabled by changing the setting of Pr.40.

From Z100 to A520: Use the FR-AAT01 to replace the Z100 with the A520. From Z100 to E520: No attachment is available sin

This parameter unit realizes both easy operation and advanced operation. In normal operation, you only need to use six k

If Pr.544 (CC-Link extended setting) is set to other than "0", you do not need to change Pr.544 (CC-Link extended settin

You can do so by setting Pr.339 (Communication speed command source) = 1 (external).

1. The BU brake unit does not have the fault output.Multiple BU brake units can be connected in parallel.2. Power supply

Yes. Set parameters as below.For FR-E500Set Pr.79 =3, and Pr.146= 0.Multi-speed is prioritized.For FR-S500Set Pr.79 = 3,

Our suggestion is to adjust the following parameters:1. Set Pr.14 = 0. If the V/F pattern for variable-torque load (Pr.1

The direct connection with the inverter like the standard model, and the connection via the GOT and relay station (progr

Use the RS485 terminal for the multiple communication of the A series/F series inverters.* Communication with the PU con

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Drive Products

Geared Motors(86)

Geared Motors Parallel shaft type(23)
Geared Motors Right angle shaft type(25)
S-PM Geared Motors Parallel shaft type(18)
S-PM Geared Motors Right angle shaft type(20)

FAQ within [ Drive Products ]

891-900 of Total 1353

prev 90 / 136page next

Reverse operation

Reverse operation is enabled by changing the setting of Pr.40. More Details >>
- No：21287
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-D700 , FREQROL-F700PJ
Replacement of FR-Z100 series

From Z100 to A520: Use the FR-AAT01 to replace the Z100 with the A520. From Z100 to E520: No attachment is available since E520 is a new series. From Z100 to... More Details >>
- No：21447
- Release Date：2018/08/22 16:27
- Category： Inverters-FREQROL , Options , FREQROL-Z100
Features of parameter unit FR-PU03

This parameter unit realizes both easy operation and advanced operation. In normal operation, you only need to use six keys for easy operation. To perform ad... More Details >>
- No：21614
- Release Date：2018/08/22 16:28
- Category： Inverters-FREQROL , FREQROL-A024
CC-Link

If Pr.544 (CC-Link extended setting) is set to other than "0", you do not need to change Pr.544 (CC-Link extended setting).Write the extended setting of the ... More Details >>
- No：21834
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
Start command, speed command

You can do so by setting Pr.339 (Communication speed command source) = 1 (external).　　 More Details >>
- No：21881
- Release Date：2018/08/22 16:29
- Category： Inverters-FREQROL , FREQROL-E700 , FREQROL-A700 , FREQROL-F700 , FREQROL-F700P
Brake unit selection

1. The BU brake unit does not have the fault output.Multiple BU brake units can be connected in parallel.2. Power supply voltage 480 V- What resistance value... More Details >>
- No：21930
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Options
Speed 2 operation with potentiometer on operation panel

Yes. Set parameters as below.For FR-E500Set Pr.79 =3, and Pr.146= 0.Multi-speed is prioritized.For FR-S500Set Pr.79 = 3, and Pr.53 = 1.Multi-speed is priorit... More Details >>
- No：21963
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-E500 , FREQROL-S500
Frequency does not rise with blower

Our suggestion is to adjust the following parameters:1. Set Pr.14 = 0. If the V/F pattern for variable-torque load (Pr.14 = 1) is used, the current may incre... More Details >>
- No：22060
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-F500
FR-A800-E

The direct connection with the inverter like the standard model, and the connection via the GOT and relay station (programmable controller) are available. On... More Details >>
- No：20879
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800 , FREQROL-F800
Communication specifications for connection of multiple inverters

Use the RS485 terminal for the multiple communication of the A series/F series inverters.* Communication with the PU connector is only one-to-one connection. More Details >>
- No：20998
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , FREQROL-A800 , FREQROL-F800

891-900 of Total 1353

Inquiries

page top