The current value of the scan time is stored in the following special devices. Please monitor using GX Works3. ◇Scan inf

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data.

For FX5U/FX5UC CPU module, firmware version 1.110 or later is supported. For the FX5UJ/FX5S CPU module, it is compatible

The execution time of the basic opeartion instruction (LD) of the FX5U/FX5UC/FX5UJ CPU module is 34 ns. *For firmware Ve

It is possible to use latch devices or I/O devices (X/Y) for link refresh devices. However, when using I/O devices (X/Y)

You can find it in the Advanced Settings section of GX Works3. Use the following procedure to display the Device (High

The Web server function allows you to log in from up to four devices at the same time. You can't log in from the fifth m

The built-in Ethernet port on the FX5 CPU module does not support EtherNet/IP communication. Use FX5-ENET/IP.

Up to 4 axes can be controlled. Please use a transistor output type CPU module. （By adding a high speed pulse input/outp

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

MELSEC iQ-F Series

Safety Control(1)

FAQ within [ MELSEC iQ-F Series ]

21-30 of Total 266

prev 3 / 27page next

Regarding the method to check the scan time

The current value of the scan time is stored in the following special devices. Please monitor using GX Works3. ◇Scan information 　SD520　Current scan time (... More Details >>
- No：22289
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:20
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding differences between 8 bit and 16 bit modes for non-protocol communication

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data. In 16 bit mode, send/receive data i... More Details >>
- No：39363
- Release Date：2023/02/15 13:04
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding Open/Close Socket Communications

No need. More Details >>
- No：39288
- Release Date：2023/02/13 15:36
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the supported version of the simple CPU communication function

For FX5U/FX5UC CPU module, firmware version 1.110 or later is supported. For the FX5UJ/FX5S CPU module, it is compatible from the first one. More Details >>
- No：39316
- Release Date：2023/02/14 08:56
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the processing specification of the basic operation instruction(LD).

The execution time of the basic opeartion instruction (LD) of the FX5U/FX5UC/FX5UJ CPU module is 34 ns. *For firmware Ver.1.100 or above, this specification ... More Details >>
- No：22287
- Release Date：2018/08/30 13:55
- Update：2023/07/03 11:56
- Category： MELSEC iQ-F Series , CPU Module
Regarding the link refresh settings of FX5-CCL-MS

It is possible to use latch devices or I/O devices (X/Y) for link refresh devices. However, when using I/O devices (X/Y), use I/O numbers (such as X1000 ~/Y... More Details >>
- No：22308
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:37
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software , Network/Communication
Regarding checking latch settings

You can find it in the Advanced Settings section of GX Works3. Use the following procedure to display the Device (High Speed) settings. From the GX Wor... More Details >>
- No：44364
- Release Date：2024/03/27 16:05
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding simultaneous access to Web Server function

The Web server function allows you to log in from up to four devices at the same time. You can't log in from the fifth machine. More Details >>
- No：39330
- Release Date：2023/02/14 09:06
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding EtherNet/IP Communications

The built-in Ethernet port on the FX5 CPU module does not support EtherNet/IP communication. Use FX5-ENET/IP. More Details >>
- No：39319
- Release Date：2023/02/14 08:57
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding the maximum number of controllable axes of the bulit-in positioning function

Up to 4 axes can be controlled. Please use a transistor output type CPU module. （By adding a high speed pulse input/output module, maximum 12 axes (CPU bui... More Details >>
- No：22300
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:52
- Category： MELSEC iQ-F Series , CPU Module , Motion/Positioning

21-30 of Total 266

Inquiries

page top