When connecting 2 FX5 CPU Modules (firmware version 1.110 or later) that support the Simple CPU communication function

For MX Component Ver.5, Ver. 5.000A or later supports the FX5U/FX5UC/FX5UJ CPU modules, and Ver. 5.003D or later support

Please update GX Works3 to the latest version. After updating, FX5-ENET/IP is displayed in the Module configuration diag

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data.

(1)Whether or not networks can be mixed on the same trunk line is different. CC-Link IE TSN allows network mixing on th

The FX5 CPU module does not support UDP broadcast communication.

For FX5U/FX5UC CPU module, firmware version 1.110 or later is supported. For the FX5UJ/FX5S CPU module, it is compatibl

The connection using the Ethernet port can establish a total of 8 connections which includes SLMP, MELSOFT connection, M

After removing the error factor, you can clear it by executing "Clear latest error code" from "Diagnostic" - "Simple CPU

Parameters can be set when connecting the MELSEC iQ-F series with FX5-CCL-MS(CC-Link system master/intelligent device).

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC > MELSEC iQ-F Series > Network/Communication

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ Network/Communication ]

11-20 of Total 97

prev 2 / 10page next

Regarding setting the FX5 CPU Module that does not support the simple CPU communication function

When connecting 2 FX5 CPU Modules (firmware version 1.110 or later) that support the Simple CPU communication function and 2 FX5 CPU Modules (firmware vers... More Details >>
- No：44329
- Release Date：2024/03/20 13:35
Regarding communication with MX Component

For MX Component Ver.5, Ver. 5.000A or later supports the FX5U/FX5UC/FX5UJ CPU modules, and Ver. 5.003D or later supports the FX5S CPU module. Also, both se... More Details >>
- No：22328
- Release Date：2018/08/30 13:55
- Update：2023/02/15 13:07
Regarding display of FX5-ENET/IP in a Module configuration Diagram

Please update GX Works3 to the latest version. After updating, FX5-ENET/IP is displayed in the Module configuration diagram of GX Works3. Download the lates... More Details >>
- No：39303
- Release Date：2023/01/12 17:13
Regarding differences between 8 bit and 16 bit modes for non-protocol communication

In 8-bit mode, the upper 8 bits of transmitted and received data are ignored and only the lower 8 bits are valid data. In 16 bit mode, send/receive data i... More Details >>
- No：39363
- Release Date：2023/02/15 13:04
Regarding the differences between CC-Link IE TSN and CC-Link IE Field Networks

(1)Whether or not networks can be mixed on the same trunk line is different. CC-Link IE TSN allows network mixing on the same trunk line. When using a CC-Li... More Details >>
- No：39359
- Release Date：2023/01/12 17:10
Regarding UDP communication

The FX5 CPU module does not support UDP broadcast communication. More Details >>
- No：22291
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:49
Regarding the supported version of the simple CPU communication function

For FX5U/FX5UC CPU module, firmware version 1.110 or later is supported. For the FX5UJ/FX5S CPU module, it is compatible from the first one. More Details >>
- No：39316
- Release Date：2023/02/14 08:56
Regarding the specifications of the built-in Ethernet function of FX5 CPU module

The connection using the Ethernet port can establish a total of 8 connections which includes SLMP, MELSOFT connection, MODBUS/TCP, socket communication, and ... More Details >>
- No：22320
- Release Date：2018/08/30 13:55
- Update：2023/07/04 15:52
Regarding how to clear simple CPU communication function errors

After removing the error factor, you can clear it by executing "Clear latest error code" from "Diagnostic" - "Simple CPU Communication Diagnostic" in GX Work... More Details >>
- No：40049
- Release Date：2023/08/25 09:06
Regarding CC-Link settings using GX Works3

Parameters can be set when connecting the MELSEC iQ-F series with FX5-CCL-MS(CC-Link system master/intelligent device). However, when connecting with FX3U-1... More Details >>
- No：22317
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:19

11-20 of Total 97

Inquiries

page top