When connecting 2 FX5 CPU Modules (firmware version 1.110 or later) that support the Simple CPU communication function

Communication is possible with simple CPU communication function of FX5 CPU, FX5-ENET, FX5-ENET/IP modules. ※FX5U and F

When the power is turned on, the FX5-CCLGN-MS performs parameter check processing, and if an error occurs, the CPU modul

Set "[PA04] Function selection A-1" to "_1_ _h: Invalid".(Note): When using Q17nCPUN, set "Servo amplifier parameter 23

Both OUT and SET instructions set the device by completion of condition.However, if not completion of condition, OUT ins

When data is sent from the RS-422/485 interface through RS-485 (2-wire type) communication and the same data comes back

In the PLC parameter setting of GX Developer, delete the start "200" of the default high-speed timer and input "0". The

The error code "2401" is "FILE SET ERROR". The individual information parameter number "1100H" corresponds to a file reg

Set as follows in the Transfer Setup window. - Select "USB" for "PC side I/F". - Select "CPU Module" for "PLC side

Select [Tool] -> [Options] from the menu of GX Developer and open <> tab.Then select "Don't write to PLC" in "A

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Controllers

Programmable Controllers MELSEC(1702)

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)
MELSEC-Q Series(213)
MELSEC-L Series(105)
MELSEC-F Series(457)
Network related products(110)
Engineering Software(129)
Motion Controllers(414)

MELSEC iQ-R Series(73)
MELSEC iQ-F Series(29)
MELSEC-Q Series(247)
MELSEC-L Series(64)
Engneering software(1)

FAQ within [ Controllers ]

151-160 of Total 1082

prev 16 / 109page next

Regarding setting the FX5 CPU Module that does not support the simple CPU communication function

When connecting 2 FX5 CPU Modules (firmware version 1.110 or later) that support the Simple CPU communication function and 2 FX5 CPU Modules (firmware vers... More Details >>
- No：44329
- Release Date：2024/03/20 13:35
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding connection through a MODBUS/TCP Gateway

Communication is possible with simple CPU communication function of FX5CPU, FX5-ENET, FX5-ENET/IP modules. ※FX5U and FX5UC CPU modules with firmware version... More Details >>
- No：39343
- Release Date：2023/01/12 17:05
- Update：2023/06/23 11:13
- Category： MELSEC iQ-F Series , CPU Module , Engineering Software
Regarding error 2440H on CPU module when using FX5-CCLGN-MS

When the power is turned on, the FX5-CCLGN-MS performs parameter check processing, and if an error occurs, the CPU module is also notified of the error. Ther... More Details >>
- No：39282
- Release Date：2023/01/12 16:49
- Category： MELSEC iQ-F Series , Network/Communication
Servo amplifier forced stop

Set "[PA04] Function selection A-1" to "_1_ _h: Invalid".(Note): When using Q17nCPUN, set "Servo amplifier parameter 23 (Optional function 1)"... More Details >>
- No：23567
- Release Date：2018/09/14 15:09
- Category： RnMTCPU , Q17nDSCPU , Q17nDCPU , Q170MSCPU , Q170MCPU , Q17nHCPU , Q17nCPUN
OUT instruction

Both OUT and SET instructions set the device by completion of condition.However, if not completion of condition, OUT instruction resets the device while SET ... More Details >>
- No：23553
- Release Date：2018/09/14 15:09
- Category： RnMTCPU , Q17nDSCPU , Q17nDCPU , Q170MSCPU , Q170MCPU , Q17nHCPU , Q17nCPUN
Receiving back (echoing back) the same data sent from QJ71C24N

When data is sent from the RS-422/485 interface through RS-485 (2-wire type) communication and the same data comes back to RDA or RDB, we call it echo back. ... More Details >>
- No：23000
- Release Date：2018/09/03 17:31
- Update：2018/09/25 17:44
- Category： Network related products
Setting a high-speed timer and a low-speed timer

In the PLC parameter setting of GX Developer, delete the start "200" of the default high-speed timer and input "0". The message indicating that "There is a d... More Details >>
- No：22943
- Release Date：2018/09/03 17:30
- Category： Engineering Software
Error code "2401" in LCPU

The error code "2401" is "FILE SET ERROR". The individual information parameter number "1100H" corresponds to a file register. The cause of the error is that... More Details >>
- No：22797
- Release Date：2018/09/03 17:30
- Category： MELSEC-L Series
Making transparent connections using GX Developer

Set as follows in the Transfer Setup window. - Select "USB" for "PC side I/F". - Select "CPU Module" for "PLC side I/F" and check "via GOT (direct couple... More Details >>
- No：22640
- Release Date：2018/09/03 17:29
- Update：2018/09/21 11:39
- Category： MELSEC-Q Series
Replacing a device in GX Developer

Select [Tool] -> [Options] from the menu of GX Developer and open <<Program common>> tab.Then select "Don't write to PLC" in "After conversion... More Details >>
- No：22565
- Release Date：2018/09/03 17:29
- Category： MELSEC-Q Series

151-160 of Total 1082

Inquiries

page top