FX3U-16CCL-M CC-Link master block and the FX3U-64CCL CC-Link interface block supports CC-Link Ver.2.0. Both blocks are d

Only one GT1020/GT1030 series (5 V type) can be connected to the FX3G series. To connect two GOTs, select the GT1020/GT1

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set

The current value of the battery voltage is stored in the special data register D8005 (battery voltage).

- Set the network module mounted in system A to station number 0 (multiplexed remote master station). Set the netwo

Identify disconnected stations using either of the following methods. (1) Select [Diagnostics] -> [CC-Link Diagnosti

The data link status is stored in SW80 to SW83.Each bit corresponds to a station number and a bit turns ON if the corres

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(672)

CPU Module(185)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(106)
Option(9)
Engineering Software(62)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

751-760 of Total 1023

prev 76 / 103page next

Regarding the simultaneous use of Simple CPU Communication and FX5-CCLGN-MS MELSOFT Connection

Can be used simultaneously. More Details >>
- No：39285
- Release Date：2023/01/12 16:50
- Category： MELSEC iQ-F Series , Network/Communication
FX series products that support CC-Link Ver.2.0

FX3U-16CCL-M CC-Link master block and the FX3U-64CCL CC-Link interface block supports CC-Link Ver.2.0. Both blocks are dedicated for the FX3 series. More Details >>
- No：25004
- Release Date：2019/04/23 11:11
- Category： MELSEC-F Series , Network/Communication
Connecting special adapters to the FX3G series

An FX3G-CNV-ADP is required. More Details >>
- No：24977
- Release Date：2019/04/23 07:20
- Category： MELSEC-F Series , Main Unit
Connection of the FX3G series and the GT1020/GT1030 series (5 V type)

Only one GT1020/GT1030 series (5 V type) can be connected to the FX3G series. To connect two GOTs, select the GT1020/GT1030 series (24 V type). More Details >>
- No：24969
- Release Date：2019/04/23 07:19
- Category： MELSEC-F Series , Main Unit
M8037 (forced STOP signal)

Yes, it is possible. To set the programmable controller to RUN again, while the programmable controller is stopped, set the built-in RUN/STOP switch as follo... More Details >>
- No：24965
- Release Date：2019/04/23 07:18
- Category： MELSEC-F Series , Main Unit
Number of FX3U-64CCL interface blocks that can be added to a main unit

One FX3U-64CCL can be added. More Details >>
- No：24962
- Release Date：2019/04/23 07:17
- Category： MELSEC-F Series , Network/Communication
Current value of the battery voltage in the FX3U/FX3UC series

The current value of the battery voltage is stored in the special data register D8005 (battery voltage). More Details >>
- No：24942
- Release Date：2019/04/18 14:25
- Category： MELSEC-F Series , Main Unit
Precaution about MELSECNET/H connection (2)

- Set the network module mounted in system A to station number 0 (multiplexed remote master station). Set the network module mounted in system B to any sta... More Details >>
- No：23054
- Release Date：2018/09/03 17:31
- Update：2018/09/26 11:00
- Category： Network related products
Identifying disconnected CC-Link stations

Identify disconnected stations using either of the following methods. (1) Select [Diagnostics] -> [CC-Link Diagnostics].from the menu in GX Works2 or G... More Details >>
- No：23053
- Release Date：2018/09/03 17:31
- Update：2018/09/26 10:59
- Category： Network related products
How to check link errors in CC-Link slave stations

The data link status is stored in SW80 to SW83.Each bit corresponds to a station number and a bit turns ON if the corresponding station causes a data link er... More Details >>
- No：23031
- Release Date：2018/09/03 17:31
- Category： Network related products

751-760 of Total 1023

Inquiries

page top