Reference manuals for programming for FX programmable controllers in ST language

The following shows the manuals for programming in ST language. - GX Works2 Beginner's Manual (Structured Project) - GX Works2 Version 1 Operating Manual... More Details >>

Accessing a QnA compatible Ethernet interface module via a router using GX Developer

For GX Developer, a connection via a QnA compatible Ethernet interface module allows communication only within the same segment. Via a router, it is impossib... More Details >>

Number of records in LCPU logging function

It is the number of data collected before and after a trigger occurrence. More Details >>

Simultaneous broadcast transmission setting for built-in Ethernet port LCPU

To send simultaneous broadcast using UDP, set the parameters as follows.- Destination IP Address: FF.FF.FF.FFh - Destination Port Number: Other than FFFFh (S... More Details >>

Operation during power failure

It stops during execution. More Details >>

Boot file setting of the QnUDVCPU

No. You cannot use an SRAM card, ATA card, or Flash card. Specify an SD memory card as the transfer source (boot source). More Details >>

Print settings of the device list in GX Works2

When [Display Option] -> [Used devices] -> [Contact] and [Coil] are selected in the Device List window, devices used are not displayed. More Details >>

Production of Q61P-A1 and Q61P-A2

They have gone out of production. However, Q61P, a succeeding model, can be used in the same way. More Details >>

Cables for CPU modules

The following Diatrend cable can be used.- DQ-U2 More Details >>

How to write to file registers in Q series

Specify the file in the Write to PLC window and execute writing. More Details >>