Measurement of the counter in the MC ...
When the count condition of the counter in the MC circuit remains set, the counter counts when the MC circuit is turned on. More Details >>
Differences in the specifications bet...
The input signal forms are different. All the programmable controllers for the domestic market other than the FX3G/FX3U series are the sink input. The progra... More Details >>
Using a fixed latched (battery backed...
Clear the required area with the ZRST instruction by using the initial pulse when the programmable controller is set to RUN. To clear all the latched type de... More Details >>
Adding two channels of the RS-232C po...
Select the 40-point or 60-point type FX3G series main unit. In this case, two FX3G-232-BDs can be connected. When FX3G-CNV-ADP is used, anFX3U-232ADP can be ... More Details >>
Overwriting a current value with the ...
The output contact is activated according to the change of the current value register along with the counting input. Therefore, the value changed by executin... More Details >>
FX series with a built-in USB port
The FX3G/FX3GC series hasa built-in USB port. More Details >>
Output numbers of the FX programmable...
Since they are octal, the number after Y7 is Y10 and after Y77 is Y100. More Details >>
Connection of the FX3G series and the...
AnFX3G-CNV-ADP is required. * When the FX3U-ENET-ADP is used with other special adapters, connect the FX3U-ENET-ADP at the last stage (left end). More Details >>
Number of extension cables that can b...
One extension cable can be used per system. Two or more extension cables cannot be used. More Details >>
Connection of the FX3G series and the...
Only one GT1020/GT1030 series (5 V type) can be connected to the FX3G series. To connect two GOTs, select the GT1020/GT1030 series (24 V type). More Details >>
81-90 of Total 804