For issuance of a certificate, please consult your local Mitsubishi representative.

Unless the necessity is described in manuals, a noise filter is not required. However, if the programmable controller i

Most of the existing programmable controllers are compliant with the EU RoHS Directive. For details, please consult your

Mitsubishi Electric shall accept product repairs for seven years after production of the product is discontinued. Howeve

Data can be cleared from GX Developer or GX Works2. [Online]→Select all [PLC memory], [Data device], and [Bit device.]

The default IP address (factory default value) of FX5 CPU modules is 192.168.3.250.

You can check the MAC address from the name plate on the side of the CPU module or by the Module diagnostics (CPU diagno

The error code "4100" is "OPERATION ERROR". The error occurs when a number is divided by 0 (Divisor D6268 value is 0).

When you connect the built-in USB port of the FX3 series to the personal computer for the first time, you need to instal

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Controllers > Programmable Controllers MELSEC

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Programmable Controllers MELSEC

MELSEC iQ-R Series(45)
MELSEC iQ-F Series(643)

CPU Module(179)
I/O Module(5)
Analog(16)
High-Speed Counter(14)
Motion/Positioning(11)
Network/Communication(97)
Option(9)
Engineering Software(61)
Safety Control(1)

Engineering Software(129)

FAQ within [ Programmable Controllers MELSEC ]

1-10 of Total 1010

prev 1 / 101page next

Regarding the Certificate of non-applicability to export to other countries

For issuance of a certificate, please consult your local Mitsubishi representative. More Details >>
- No：22301
- Release Date：2018/08/30 13:55
- Update：2023/06/23 10:15
- Category： MELSEC iQ-F Series , Option , CPU Module , I/O Module , Engineering Software , Network/Communication , Motion/Positioning , High-Speed Counter , Analog
Certificate of non-applicability to export MELSEC-F to other countries

For issuance of a certificate, please consult your local Mitsubishi representative. More Details >>
- No：22264
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , I/O Extension , Analog Control , High-Speed Counting , Positioning Control , Network/Communication , Accessories
Necessity for installing a noise filter

Unless the necessity is described in manuals, a noise filter is not required. However, if the programmable controller is used in an environment with much no... More Details >>
- No：22283
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Main Unit , I/O Extension , Analog Control , High-Speed Counting , Positioning Control , Network/Communication , Accessories
Compliance of the FX programmable controllers with the EU RoHS Directive

Most of the existing programmable controllers are compliant with the EU RoHS Directive. For details, please consult your local Mitsubishi Electric representa... More Details >>
- No：24888
- Release Date：2019/04/15 08:07
- Category： MELSEC-F Series , Main Unit , I/O Extension , Analog Control , High-Speed Counting , Positioning Control , Network/Communication , Accessories
Repair term for the FX programmable controllers after discontinuation of production

Mitsubishi Electric shall accept product repairs for seven years after production of the product is discontinued. However, some products cannot be repaired d... More Details >>
- No：24996
- Release Date：2019/04/23 10:41
- Category： MELSEC-F Series , Main Unit , I/O Extension , Analog Control , High-Speed Counting , Positioning Control , Network/Communication , Accessories
Deleting all programs and data from the memory

Data can be cleared from GX Developer or GX Works2. [Online]→Select all [PLC memory], [Data device], and [Bit device.] on the Clear PLC memory window, and e... More Details >>
- No：22269
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit
Regarding the default IP address

The default IP address (factory default value) of FX5CPU modules is 192.168.3.250. More Details >>
- No：22290
- Release Date：2018/08/30 13:55
- Update：2022/12/22 08:33
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Regarding how to check MAC Addresses

You can check the MAC address from the name plate on the side of the CPU module or by the Module diagnostics (CPU diagnostics) of GX Works3. More Details >>
- No：39294
- Release Date：2023/02/13 15:37
- Category： MELSEC iQ-F Series , CPU Module , Network/Communication
Error code "4100" in QCPU

The error code "4100" is "OPERATION ERROR". The error occurs when a number is divided by 0 (Divisor D6268 value is 0). Make modifications so that the divis... More Details >>
- No：22533
- Release Date：2018/09/03 17:28
- Update：2018/09/20 14:43
- Category： MELSEC-Q Series
Communications using the built-in USB port of the FX3 series

When you connect the built-in USB port of the FX3 series to the personal computer for the first time, you need to install the USB driver into the personal co... More Details >>
- No：22273
- Release Date：2018/08/30 13:48
- Category： MELSEC-F Series , Engineering Software , Main Unit , Network/Communication

1-10 of Total 1010

Inquiries

page top