1. It depends on how Pr.338 (Communication operation command source) and Pr.339 (Communication speed command source) are

If Pr.340 (Communication startup mode selection) and Pr.79 (Operation mode selection) are set so that the inverter start

This is due to specifications that multi-speed selection is prioritized and setting with the setting dial is ignored.The

Yes. You can use the setting dial of the inverter to set the frequency as well as change the parameter values.

To enable the frequency setting with the setting dial and multi-speed setting, set Pr.79 to "3". Note that multi-speed s

Rapid blinking of the RUN LED indicates that the frequency setting command has not been input or the output stop signal

The frequency can be set to 65 Hz with the initial setting.Check if Pr.1 (Maximum frequency) is set to 60 Hz.

Input 4 words, output 4 words for version 1. 2, 4, and 8 times for version 2.

Connect the wire to the optional FR-A7NC's terminal block. (The terminal block is detachable.)

Set Pr.340 (Communication startup mode selection) to "10".The operation mode can be switched between PU and NET by assig

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL > FREQROL-E700

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ FREQROL-E700 ]

301-310 of Total 394

prev 31 / 40page next

CC-Link

1. It depends on how Pr.338 (Communication operation command source) and Pr.339 (Communication speed command source) are set.2. The external terminal reset i... More Details >>
- No：21838
- Release Date：2018/08/22 16:29
CC-Link

If Pr.340 (Communication startup mode selection) and Pr.79 (Operation mode selection) are set so that the inverter starts CC-Link operation from power-on and... More Details >>
- No：21840
- Release Date：2018/08/22 16:29
Frequency setting

This is due to specifications that multi-speed selection is prioritized and setting with the setting dial is ignored.The setting dial is effective when multi... More Details >>
- No：21843
- Release Date：2018/08/22 16:29
Setting dial

Yes. You can use the setting dial of the inverter to set the frequency as well as change the parameter values. More Details >>
- No：21846
- Release Date：2018/08/22 16:29
Operation mode setting

To enable the frequency setting with the setting dial and multi-speed setting, set Pr.79 to "3". Note that multi-speed setting is prioritized over setting us... More Details >>
- No：21852
- Release Date：2018/08/22 16:29
Operation mode setting

Rapid blinking of the RUN LED indicates that the frequency setting command has not been input or the output stop signal has been input.Since Pr.79 is set to ... More Details >>
- No：21853
- Release Date：2018/08/22 16:29
Frequency setting

The frequency can be set to 65 Hz with the initial setting.Check if Pr.1 (Maximum frequency) is set to 60 Hz. More Details >>
- No：21858
- Release Date：2018/08/22 16:29
CC-Link

Input 4 words, output 4 words for version 1. 2, 4, and 8 times for version 2. More Details >>
- No：21874
- Release Date：2018/08/22 16:29
CC-Link

Connect the wire to the optional FR-A7NC's terminal block. (The terminal block is detachable.) More Details >>
- No：21875
- Release Date：2018/08/22 16:29
Switching between PU and NET operation modes

Set Pr.340 (Communication startup mode selection) to "10".The operation mode can be switched between PU and NET by assigning X65 (PU-NET operation switching)... More Details >>
- No：21878
- Release Date：2018/08/22 16:29

301-310 of Total 394

Inquiries

page top