Change Pr.126 (Terminal 4 frequency setting gain frequency).

For an inverter with the terminal AU, use the terminal AU. For other inverters, assign the AU function to an unused term

You can connect a 1 mA full scale ammeter with internal resistance 300 Ω or lower.

Adjust the terminal 2 bias with Pr.C2 and Pr.C3, and the terminal 2 gain with Pr.125 and Pr.C4. Set Pr.C2 (Terminal 2 fr

You can write frequency setting by setting Pr.339 (Communication speed command source) to "0".

Yes. Set Pr.89 (Speed control gain) to "0".

Set Pr.270 (Stop-on-contact control) to "1".Set Pr.184 (RES terminal function selection) to "3" to choose the RT signal

Yes, you can use the setup software (FR-SW3-SETUP-WJ) to set it.

Yes, you can set all of the three relay contacts to fault contacts.Set Pr.320 (RA1 output selection), 321 (RA2 output se

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products > Inverters-FREQROL > FREQROL-A700

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

FAQ within [ FREQROL-A700 ]

131-140 of Total 352

prev 14 / 36page next

Terminal

Change Pr.126 (Terminal 4 frequency setting gain frequency). More Details >>
- No：21677
- Release Date：2018/08/22 16:28
Terminal

For an inverter with the terminal AU, use the terminal AU. For other inverters, assign the AU function to an unused terminal. And, short-circuit (turn ON) th... More Details >>
- No：21678
- Release Date：2018/08/22 16:28
Terminal FM

You can connect a 1 mA full scale ammeter with internal resistance 300 Ω or lower. More Details >>
- No：21680
- Release Date：2018/08/22 16:28
Frequency setting

Adjust the terminal 2 bias with Pr.C2 and Pr.C3, and the terminal 2 gain with Pr.125 and Pr.C4. Set Pr.C2 (Terminal 2 frequency setting bias frequency) to 20... More Details >>
- No：21685
- Release Date：2018/08/22 16:28
Switching between external operation and NET operation

You can write frequency setting by setting Pr.339 (Communication speed command source) to "0". More Details >>
- No：21687
- Release Date：2018/08/22 16:28
Advanced magnetic flux vector control

Yes. Set Pr.89 (Speed control gain) to "0". More Details >>
- No：21690
- Release Date：2018/08/22 16:28
Stop-on-contact control

Set Pr.270 (Stop-on-contact control) to "1".Set Pr.184 (RES terminal function selection) to "3" to choose the RT signal function.When the terminals RL and RT... More Details >>
- No：21691
- Release Date：2018/08/22 16:28
FR-Configurator

Yes, you can use the setup software (FR-SW3-SETUP-WJ) to set it.　　 More Details >>
- No：21711
- Release Date：2018/08/22 16:29
FR-A7AR E kit (Relay output function)

Yes, you can set all of the three relay contacts to fault contacts.Set Pr.320 (RA1 output selection), 321 (RA2 output selection), and 322 (RA3 output selecti... More Details >>
- No：21712
- Release Date：2018/08/22 16:29
CC-Link

Yes. More Details >>
- No：21713
- Release Date：2018/08/22 16:29

131-140 of Total 352

Inquiries

page top