It is possible when Pr.23 = 0 (Current limit at regenerative driving).

You can download the instruction manual from the Mitsubishi Electric FA Global Website. Visit the Mitsubishi Electric F

Keep 1 cm or more of clearance for 3.7 K or smaller, and 5 cm or more for 5.5 K or larger.If the clearance is too small,

When driving multiple motors with a single inverter, determine the inverter capacity in one of the following two methods

1. Since the voltage resistance of the standard motor is not improved, it is recommended to use an "insulation-enhanced

It is not available and "Err" is displayed. When the FR-HC2 dedicated DU (FR-DU07-CNV) is installed to the inverter, "Er

When the PG24 terminal and the PG terminal are shorted, 24 VDC power for the encoder can be supplied from the PG24 termi

When the value is written to Pr.646 (Stored winding diameter), the stored value is used. When the value is not written,

The FR-E7TR does not have the terminal for the SC and it cannot be used with the FR-E700-SC.

When the rotary switch is “0”, the 1st axis and is “1”, the 2nd axis. When the rotary switch is “A”, the 11th axis and i

FAQ

FAQAbout Products

Font Size
S
M
L

FAQ > Drive Products

FAQ

Inquiries

Keyword Search

You can search two or more words separated by a space.

 AND : Put a space between the words in a keyphrase.
 OR  : Add a vertical bar ( | ) between the words in a keyphrase.
 NOT : Add a minus sign ( - ) followed by the words that you would like to exclude.

Result Type

Text Search

Drive Products

Geared Motors(88)

Geared Motors Parallel shaft type(24)
Geared Motors Right angle shaft type(26)
S-PM Geared Motors Parallel shaft type(18)
S-PM Geared Motors Right angle shaft type(20)

FAQ within [ Drive Products ]

1291-1300 of Total 1368

prev 130 / 137page next

FR-HC2

It is possible when Pr.23 = 0 (Current limit at regenerative driving). More Details >>
- No：20826
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , Options
Instruction manual of capacity selection software

You can download the instruction manual from the Mitsubishi Electric FA Global Website. Visit the Mitsubishi Electric FA Global Website and go to [Download]... More Details >>
- No：23643
- Release Date：2018/09/14 15:10
- Category： Servo Support Software
Installation clearance of inverters

Keep 1 cm or more of clearance for 3.7 K or smaller, and 5 cm or more for 5.5 K or larger.If the clearance is too small, the cooling effect is lowered. Secur... More Details >>
- No：22046
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , FREQROL-A500
Inverter selection when driving multiple motors

When driving multiple motors with a single inverter, determine the inverter capacity in one of the following two methods:1. When driving multiple motors conn... More Details >>
- No：22007
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL
Surge voltage of 400 V inverter

1. Since the voltage resistance of the standard motor is not improved, it is recommended to use an "insulation-enhanced motor".If you are using an insulation... More Details >>
- No：21957
- Release Date：2018/08/22 16:30
- Category： Inverters-FREQROL , Others
FR-HC2

It is not available and "Err" is displayed. When the FR-HC2 dedicated DU (FR-DU07-CNV) is installed to the inverter, "Err" is displayed as well. The FR-PU07 ... More Details >>
- No：21148
- Release Date：2018/08/22 16:26
- Category： Inverters-FREQROL , Options
FR-A8AL

When the PG24 terminal and the PG terminal are shorted, 24 VDC power for the encoder can be supplied from the PG24 terminal. More Details >>
- No：20954
- Release Date：2018/08/22 16:25
- Category： Inverters-FREQROL , Plug-in Options
FR-A800-R2R

When the value is written to Pr.646 (Stored winding diameter), the stored value is used. When the value is not written, the minimum or maximum winding diamet... More Details >>
- No：20887
- Release Date：2018/08/22 16:24
- Category： Inverters-FREQROL , FREQROL-A800
FR-E700-SC

The FR-E7TR does not have the terminal for the SC and it cannot be used with the FR-E700-SC. More Details >>
- No：20865
- Release Date：2018/08/22 16:24
- Category： FREQROL-E700
Relationship between rotary switch and axis number

When the rotary switch is “0”, the 1st axis and is “1”, the 2nd axis. When the rotary switch is “A”, the 11th axis and is “F”, the 16th axis. In combination ... More Details >>
- No：23644
- Release Date：2018/09/14 15:10
- Category： MELSERVO-J4

1291-1300 of Total 1368

Inquiries

page top